Skip to content
Sections
Personal tools
You are here: Home » Members » drosen's Home

Home Page for David Rosen

Document Actions
This is a personal page listing the member's contact information, research interests, publications, and other information.

Contact Information

Status:

Professor in Mechanical Engineering

Associate Chair for Administration

Director of the Rapid Prototyping & Manufacturing Institute

Office:

Manufacturing Research Center (MARC), Room 252                          
Georgia Institute of Technology
813 Ferst Drive, NW
Atlanta, Georgia
30332-0405

Phone: (404) 894-9668

Fax:      (404) 894-9342

Email:   mailto:david.rosen@me.gatech.edu

URL:     www.srl.gatech.edu/Members/drosen

 

 

 

 

Research Interests

Computer-aided product development, with an emphasis on design methodology, CAD/CAM/CAE, additive manufacturing, rapid prototyping, and personalized manufacturing.

 

Education

Ph.D., Mechanical Engineering. 1992
Advisor: Dr. John R. Dixon
Ph.D. Dissertation Title: A Feature-Based Representation to Support the Design Process and the Manufacturability Evaluation of Mechanical Components.

Positions Held

  • The George W. Woodruff School of Mechanical Engineering, Associate Chair for Administration, July 2009 - Present.
  • The George W. Woodruff School of Mechanical Engineering, Associate Chair for Graduate Studies, May 2007 - July 2009.
  • Loughborough University, UK, School of Mechanical and Manufacturing Engineering.  Visiting Professor, 2005, 2008-present.
  • The George W. Woodruff Schoolof Mechanical Engineering,Georgia Institute of Technology, Atlanta,Georgia. September 1992 - present
     Professor as of July 2004
  • The George W. Woodruff School of Mechanical Engineering, GeorgiaInstitute of Technology, Atlanta, Georgia. Summer 1992.
    Instructor for ME 3110
  • Department of Mechanical Engineering, University of Massachusetts,Amherst, MA 1989 - 1992.
    Graduate Research Assistant.
  • Ford Motor Company, Ford ScientificResearch Laboratory, Dearborn, MI. 1990. Visiting Research Scientist
  • Computervision Corporation and Prime Computer, Bedford, MA.1987 - 1989.
    Software Engineer.

TrussCreator Video

Video (.avi) file (170MB)

 

RMSelect Downloads

RMSelect User Manual

RMSelect Software (80MB Zip file)

 

Publications

 

TextBook

1.     Gibson, I, Rosen, D.W., Stucker, B., Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, Springer, 2009.  ISBN: 978-1-4419-1119-3

Journal Articles

1.     Rosen, D. W., Bras, B. A., Hassenzahl, S. L., Newcomb, P. J., Yu, T., “Towards Computer-Aided Configuration Design for the Life Cycle,” J. of Intelligent Manufacturing. Vol. 7, pp. 145-60, 1996.

2.     Rosen, D. W. and Peters, T. J., “The Role of Topology in Engineering Design Research,” Research in Engineering Design, Vol 8, No. 2. pp. 81-98, 1996.

3.     Coulter, S. L., Bras, B., and Rosen, D. W., “Formulating and Solving Parametric Design Problems involving Non-Interference Constraints,” Engineering with Computers, Vol. 13, pp. 112-24, 1997. Also a conference publication: IV.B.21.

4.     Koenig, P C, Duffey, M R, Rosen, D W, Singh, P, “Design Infrastructure in Shipbuilding and Other Heavy Industries,” Transactions of the Society of Naval Architects and Marine Engineers.  Vol. 104, pp. 191-217, 1997. Also a conference publication: IV.B.29.

5.     Siddique, Z, Rosen, D W, “Automated Product Disassembly Reasoning,” Computer-Aided Design, vol. 29, no. 12, pp. 847-860, 1997.

6.     Simpson, T.W., Rosen, D W, Allen, J K, Mistree, F, “Metrics for Assessing Design Freedom and Information Certainty in the Early Stages of Design,” ASME Journal of Mechanical Design, Vol. 120, pp. 628 – 635, December 1998. Also a conference publication: IV.B.28.

7.     McClurkin, J. E. and Rosen, D. W., “Computer-Aided Build Style Decision Support for Stereolithography,” Rapid Prototyping Journal, Vol. 4, No. 1, pp. 4-13, 1998.

8.     Newcomb, P J, Bras, B A, Rosen, D W, “Implications of Modularity on Product Design for the Life Cycle,” ASME J. of Mechanical Design. Vol. 120, No. 3, pp. 483-90, September 1998. Also a conference publication: IV.B.26.

9.     Bauer, M. D., Siddique, Z., and Rosen, D. W., “A Virtual Prototyping System for Design for Assembly, Disassembly, and Service,” J. of Agile Manufacturing, Vol. 2, No. 2, pp. 119-138, 1999.

10.  Han, J.-H. and Rosen, D. W., “Special Panel Session for Feature Recognition at the 1997 ASME Computers in Engineering Conference,” Computer-Aided Design, Vol. 30, No. 13, pp. 979-981, 1998.

11.  Bauer, M. D. and Rosen, D. W., “A Modified Pattern Search Method with Relaxed Lexicographic Minimization for Engineering Design,” Engineering Optimization, Vol. 32, pp. 219-247, 1999.

12.  Lynn-Charney, C.M. and Rosen, D.W., “Accuracy Models and Their Use in Stereolithography Process Planning,” Rapid Prototyping Journal, Vol. 6, No. 2, pp. 77-86, 2000.

13.  Harper, B. D. and Rosen, D. W., “Computer-Aided Design for Product De- & Remanufacture,” J. of Design and Manufacturing Automation, Vol. 4, No. 1, pp. 37-46, 2001.

14.  Siddique, Z. and Rosen, D.W., “On Discrete Design Spaces for the Configuration Design of Product Families,” Artificial Intelligence in Engineering, Design, Automation, and Manufacturing, Vol. 15, pp. 1-18, 2001.

15.  West, A.P., Sambu, S., and Rosen, D.W., “ A Process Planning Method for Improving Build Performance in Stereolithography,” Computer-Aided Design, Vol. 33, No. 1, pp. 65-80, 2001.

16.  Dutta, D., Prinz, F.B., Rosen, D., and Weiss, L., “Layered Manufacturing: Current Status and Future Trends,” ASME Journal of Computing and Information Science in Engineering, Vol. 1, No. 1, pp. 60-71, 2001.

17.  Hemrick, J., Starr, T., and Rosen, D., “Release Behavior for Powder Injection Molding in Stereolithography Molds,” Rapid Prototyping Journal, Vol. 7, No. 2, pp. 115 – 121, 2001.

18.  Gerhard, J.F., Rosen, D., Allen, J.K., and Mistree, F., “A Distributed Product Realization Environment for Design and Manufacturing,” ASME Journal of Computing and Information Science in Engineering, Vol. 1, No. 3, pp. 235-244, 2001.

19.  Kataria, A. and Rosen, D.W., “Building Around Inserts: Methods for Fabricating Complex Devices in Stereolithography,” Rapid Prototyping Journal, Vol. 7, No. 5, pp. 253-261, 2001.

20.  Chen, Y. and Rosen, D.W., “A Region Based Method to Automated Design of Multi-Piece Molds with Application to Rapid Tooling,” ASME Journal of Computing and Information Science in Engineering, Vol. 2, No. 2, pp. 86-97, 2002.

21.  Tse, L.A., Hesketh, P.J., Rosen, D.W., Gole, J.L., “Stereolithography on Silicon for Microfluidics and Microsensor Packaging,” Microsystem Technologies, Vol. 9, pp. 319-323, 2003.

22.  Chen, Y. and Rosen, D.W., “A Reverse Glue Approach to Automated Construction of Multi-Piece Molds With Application to Rapid Tooling,” ASME Journal of Computing and Information Science in Engineering, Vol. 3, No. 3, pp. 219-230, 2003.

23.  Rosen, D.W., Chen, Y., Sambu, S., Allen, J.K., Mistree, F., “The Rapid Tooling Testbed: A Distributed Design-for-Manufacturing System,” Rapid Prototyping Journal, Vol. 9, No. 3, pp. 122-132, 2003.

24.  Corbett, B. and Rosen, D.W., “A Configuration Design Based Method for Platform Commonization for Product Families,” Artificial Intelligence in Engineering, Design, Automation, and Manufacturing, Vol. 18, No. 1, pp. 21-39, 2004.

25.  Sambu, S., Chen, Y., and Rosen, D.W., “Geometric Tailoring:  A Design For Manufacturing Method for Rapid Prototyping and Rapid Tooling,” ASME Journal of Mechanical Design, Vol. 126, No. 4, pp. 571-580, 2004.

26.  Chan, D.C.N., Frazier, K.B., Tse, L.A., Rosen, D.W., “Application of Rapid Prototyping to Operative Dentistry Curriculum,” Journal of Dental Education, Vol. 68, No. 1, pp. 64-70, 2004.

27.  Tang, Y, Henderson, C, Muzzy, J., Rosen, D.W., “Stereolithography Cure Modeling and Simulation,” Int. J. Materials and Product Technology, Vol. 21, No. 4, pp.255-272, 2004.

28.  Xiao, A., Zeng, S., Allen, J.K., Rosen, D.W., Mistree, F., “Collaborative Multidisciplinary Decision Making using Game Theory and Design Capability Indices,” Research in Engineering Design, Vol. 16, No. 1, pp. 57-72, 2005.

29.  Fernández, M.G., Seepersad, C.C., Rosen, D.W., Allen, J.K., Mistree, F., “Decision Support in Concurrent Engineering – The Utility-Based Selection Decision Support Problem,” Concurrent Engineering: Research & Applications, Vol. 13, No. 1, pp. 13-28, 2005.

30.  Khosrowjerdi, M., Kinzel, G.L., Rosen, D.W., “Computers in Education: Activities, Contributions, and Future Trends,” ASME J. of Computing and Information Science in Engineering, Vol. 5, No. 3, pp. 257-263, 2005.

31.  Limaye, A, Rosen, D.W., “Process Planning Method for Mask Projection Micro-Stereolithography,” Rapid Prototyping Journal, Vol. 13, No. 2, pp. 76-84, 2007.

32.  Limaye, A, Rosen, D.W., “Compensation zone approach to avoid Z errors in Mask Projection Stereolithography builds,” Rapid Prototyping Journal, Vol.12, No. 5, pp. 283-291, 2006.

33.  Pierce, RS, Rosen, DW, “A Method for Integrating Form Errors Into Geometric Tolerance Analysis,” accepted in ASME Journal of Mechanical Design, 12/06.

34.  An, N., Lu, J.-C., and Rosen, D. (2006), “Supply-Chain Oriented Robust Parameter Design,” International Journal of Production Research Special Issue on Advances on Quality Engineering (accepted).

35.  Xiao, A., Allen, J.K., Rosen, D.W., Mistree, F. “An Application of Game Theory in collaborative Decision Making Across Digital Interfaces,” Engineering with Computers, accepted 10/06.

36.  Xiao, A.; Seepersad, C. C.; Allen, J.K.; Rosen, D. W.; Mistree, F., “Design for manufacturing: application of collaborative multidisciplinary decision-making methodology,” Engineering Optimization, Vol. 39 Issue 4, p. 429-451, 2007.

37.  Pierce, RS, Rosen, DW, “Simulation of Mating Between Non-Analytic Surfaces Using a Mathematical Programming Formulation,” accepted in ASME J. of Computing and Information Science in Engineering, 12/06.

38.  Choi, H-J, McDowell, DL, Allen, JK, Rosen, DW, Mistree, F, An Inductive Design Exploration Method for Robust Multiscale Materials Design,” accepted in ASME J. of Mechanical Design, 12/06.

39.  Chen, Y., Wang, H., Rosen, D.W., Rossignac, J., “A Point-Based Offsetting Method of Polygonal Meshes,” accepted in ASME J. of Computing and Information Science in Engineering, 1/07.

40.  Rosen, D.W., “Computer-Aided Design for Additive Manufacturing of Cellular Structures,” Computer-Aided Design & Applications, Vol. 4, No. 5, 585-594, 2007.

 41. Yim, S., Rosen, D.W., “A Repository for Design for Manufacturing Problems using Description Logics,” J. of Manufacturing Technology Management, Vol. 19, No. 6, pp. 755-774, 2008.

42. Udoyen, N., Rosen, D.W., “Description Logic Representation of Finite Element Analysis Models for Automated Retrieval, ASME J. of Computing and Information Science in Engineering, Vol. 8, No. 3, 2008.

43. Sager, B., Rosen, D.W., “Use of Parameter Estimation for Stereolithography Surface Finish Improvement,” Rapid Prototyping Journal, Vol. 14, No. 4, pp. 213-220, 2008.

44. Chu, C, Graf, G, Rosen, D.W., “Design for Additive Manufacturing of Cellular Structures,” Computer-Aided Design & Applications, Vol. 5, No. 5, 2008.

45.   Udoyen, N, Rosen, D.W., “Reusability-Based Selection of Parametric Finite Element Analysis Models, Artificial Intelligence in Engineering Design, Analysis, and Manufacturing, Vol. 23, pp. 197-214, 2009.

46. Chu, C., Engelbrecht, S., Graf, G.C., Rosen, D.W., “A Comparison of Synthesis Methods for Cellular Structures with Application to Additive Manufacturing,”accepted in Rapid Prototyping Journal, 2/2009.

47. Wilson, J.O., Nelson, B.A., Rosen, D.W., Yen, J., “The Effects of Biological Strategies in Idea Generation,” accepted in Design Studies, 7/2009.

48. Wilson, J.O., Nelson, B.A., Rosen, D.W., Yen, J., “Refined Metrics for Measuring Ideation Effectiveness,” Design Studies, Vol. 30, pp 737-743.

 

Refereed Conference Papers

1.     Panchal, J.H., Chamberlain, M.K., Rosen, D.W., Allen, J.K., Mistree, F.  A Service Based Architecture for Information and Asset Utilization in Distributed Product Realization,” AIAA Conference, Atlanta, 2002.

2.     Sambu, S., Chen, Y., and Rosen, D.W., “Geometric Tailoring:  A Design For Manufacturing Method for Rapid Prototyping and Rapid Tooling,” ASME Design for Manufacturing Conference, DETC2002/DFM-34169, Montreal, Sept. 29-Oct 2, 2002.

3.     Wang, H. and Rosen, D.W., “Parametric Modeling Method for Truss Structures,” ASME Computers and Information in Engineering Conference, DETC2002/CIE-34495, Montreal, Sept. 29-Oct 2, 2002.

4.     Fernandez, M., Rosen, D.W., Allen, J.K., and Mistree, F., “Digital Interfaces: The Key to Effective Decision-Making in Distributed Collaborative Design and Manufacture,” ASME Computers and Information in Engineering Conference, DETC2002/CIE-34466, Montreal, Sept. 29-Oct 2, 2002

5.     Kulkarni, R., Rosen, D.W., Allen, J.K., and Mistree, F., “An Information Model for Finding and Integrating Distributed Resources for Engineering Design-Manufacturing Processes,” ASME Computers and Information in Engineering Conference, DETC2002/CIE-34464, Montreal, Sept. 29-Oct 2, 2002.

6.     Xiao, A., Choi, H-J., Allen, J.K., Rosen, D.W., Mistree, F., “Collaborative Decision Making across Digital Interfaces,” ASME Design Automation Conference, DETC2002/DAC-34073, Montreal, Sept. 29-Oct 2, 2002.

7.     Rosen, D.W., Chen, Y., Sambu, S., Allen, J.K., Mistree, F., “The Rapid Tooling Testbed: A Distributed Design-for-Manufacturing System,” Int’l Conference on Manufacturing Automation, Eds. ST Tan, I Gibson, YH Chen, pp. 491-499, Hong Kong, Dec. 10-12, 2002.

8.     Wang, H. and Rosen, D.W., “Computer-Aided Design Methods for Additive Fabrication of Truss Structures,” Int’l Conference on Manufacturing Automation, Eds. ST Tan, I Gibson, YH Chen, pp. 117-126, Hong Kong, Dec. 10-12, 2002.

9.     Williams, C. B., Panchal, J.H., and Rosen, D.W., “A General Decision-Making Method for the Rapid Manufacture of Customized Parts,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-48198, Chicago, Sept. 2-6, 2003.

10.  Chen, Y. and Rosen, D.W., “A Reverse Glue Approach to Automated Construction of Multi-Piece Molds,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-4817, Chicago, Sept. 2-6, 2003.

11.  Jangha, S. and Rosen, D.W., “EMEDS: A System to Determine Ejection Layout for Rapid-Tooled Injection Molds,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-48193, Chicago, Sept. 2-6, 2003.

12.  Park, J-H. and Rosen, D.W., “Generation of Process Plans for Laser Chemical Vapor Deposition,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-48187, Chicago, Sept. 2-6, 2003.

13.  Rosen, D.W., Nguyen, A., and Wang, H., “On the Geometry of Low Degree-of-Freedom Digital Clay Human-Computer Interface Devices,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-48295, Chicago, Sept. 2-6, 2003.

14.  Choi, H-J., Panchal, J.H., Allen, J.K., Rosen, D.W., Mistree, F. “Towards a Standardized Engineering Framework for Distributed, Collaborative Product Realization,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-48279, Chicago, Sept. 2-6, 2003.

15.  Corbett, B. and Rosen, D.W., “Platform Commonization with Discrete Design Spaces: Introduction of the Flow Design Space,” Proceedings ASME Design Theory and Methodology Conference, paper DETC2003/DTM-48678, Chicago, Sept. 2-6, 2003.

16.  Johnson, R.W., Park, J-H., Lackey, W.J., Rosen, D.W., “Advances in Laser Chemical Vapor Deposition of Metals and Ceramics,” Proceedings Int’l Conference on Advanced Research in Virtual and Rapid Prototyping, Eds. PJ Bartolo and G Mitchell, Leiria, Portugal, Oct. 1-4, 2003.

17.  Tang, Y., Henderson, C., Muzzy, J., Rosen, D.W., “Stereolithography Cure Modeling and Simulation,”  Proceedings Int’l Conference on Advanced Research in Virtual and Rapid Prototyping, Eds. PJ Bartolo and G Mitchell, Leiria, Portugal, Oct. 1-4, 2003.

18.  Limaye, A., Rosen, D.W., “Quantifying Dimensional Accuracy of a Mask Projection Micro Stereolithography System,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 2-4, 2004.

19.  Sager, B., Rosen, D.W., “On the Use of Angled, Dynamic Laser Beams to Improve Stereolithography Surface Finish,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 2-4, 2004.

20.  Tang, Y, Henderson, C.L., Muzzy, J.D., Rosen, D.W., “Stereolithography (SL) Cure Process Modeling Using Acrylate Resins,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 2-4, 2004.

21.  Williams, C.B., Allen, J.K., Rosen, D., Mistree, F., “Designing Platforms for Customizable Products in Markets with Non-Uniform Demand,” Proc. ASME Design Theory and Methodology Conference, paper #DETC2004-57469, Salt Lake City, Sept 29-Oct 1, 2004.

22.  Gao, F., Hong, S, Rosen, D.W., “Feature-Based Geometric Modeling Approach to Surface Micromachining MEMS,” Proc. ASME Computers and Information in Engineering Conference, paper #DETC2004-57692, Salt Lake City, Sept 29-Oct 1, 2004.

23.  Limaye, A, Rosen, D.W., “Compensation zone approach to avoid Z errors in Mask Projection Stereolithography builds,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 1-3, 2005 (Outstanding Paper Award).

24.  Sager, B., Rosen, D.W., “Use of Parameter Estimation For Stereolithography Surface Finish Improvement,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 1-3, 2005.

25.  Williams, C.B., Allen, J.K., Rosen, D., Mistree, F., “Towards the Design of a Layer-Based Additive Manufacturing Process for the Realization of Metal Parts of Designed Mesostructure,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 1-3, 2005.

26.  Pierce, RS, Rosen, DW, “Simulation of Mating Between Non-Analytic Surfaces Using a Mathematical Programming Formulation,” Proc. ASME Computers and Information in Engineering Conference, paper DETC2005-84342, Long Beach, CA, Sept 24-28, 2005.

27.  Pierce, RS, Rosen, DW, “A Method for Integrating Form Errors Into Geometric Tolerance Analysis,” Proc. ASME Design Automation Conference, paper DETC2005-84343, Long Beach, CA, Sept 24-28, 2005.

28.  Rosen, DW, Nguyen, AN, “Simulation Methods for Formable Crust Skins of Digital Clay Human-Computer Interface Devices,” Proc. ASME Computers and Information in Engineering Conference, paper DETC2005-84455, Long Beach, CA, Sept 24-28, 2005.

29.  Chen, Y, Wang, H, Rosen, DW, Rossignac, J, “Filleting and Rounding using a Point-Based Method,” Proc. ASME Design Automation Conference, paper DETC2005-DAC85408, Long Beach, CA, Sept 24-28, 2005.

30.  Wang, H, Chen, Y, Rosen, DW, “A Hybrid Geometric Modeling Method for Large Scale Conformal Cellular Structures, Proc. ASME Computers and Information in Engineering Conference, paper DETC2005-85366, Long Beach, CA, Sept 24-28, 2005.  Best Paper Award.

31.  Wilson, J., Rosen, D.W., “Selection for Rapid Manufacturing under Epistemic Uncertainty,” Proc. ASME Design Automation Conference, paper DETC2005/DFMLC-85264, Long Beach, CA, Sept 24-28, 2005.

32.  Choi, H-J, Allen, JK, Rosen, DW, McDowell, DL, Mistree, F, “An Inductive Design Exploration Method for the Integrated Design of Multi-scale Materials and Products,” Proc. ASME Design Automation Conference, paper DETC2005-85335, Long Beach, CA, Sept 24-28, 2005.

33.  Williams, C.B., Mistree, F., Rosen, D.W., “Investigation of Additive Manufacturing Processes for the Manufacture of Parts with Designed Mesostructure,” Proc. ASME Design for Manufacturing Conference, paper DETC2005/DFMLC-84832, Long Beach, CA, Sept 24-28, 2005.

34.  Tse, L.A., Rosen, D.W., “3D Membrane Electrode Assemblies (MEAs) for Direct Methanol Fuel Cells,” ASME IMECE, paper IMECE2005-81843, Orlando, Nov. 5-11, 2005.

35.  Wang, H., Johnston, S.J., Rosen, D.W., “Design of a Graded Cellular Structure for an Acetabular Hip Replacement Component, Solid Freeform Fabrication Symposium, Austin, TX, pp. 111-123, Aug. 14-16, 2006.

36.  Mocko, G., Rosen, D.W., Mistree, F., “A Critical Analysis of Description Logics for Engineering Information Management,” ASME Computers in Engineering Conference, paper #DETC2006-99473, Philadelphia, Sept. 10-13, 2006.

37.  Udoyen, N., Rosen, D.W., Mistree, F., “Description Logic Representation of Finite Element Analysis Models for Automated Retrieval,” ASME Computers in Engineering Conference, paper #DETC2006-99451, Philadelphia, Sept. 10-13, 2006.

38.  Wang, H., Rosen, D.W., “An Automated Design Synthesis Method for Compliant Mechanisms with Application to Morphing Wings,” ASME Mechanisms Conference, paper #DETC2006-99661, Philadelphia, Sept. 10-13, 2006.

39.  Williams, C.B., Rosen, D.W., “Cellular Materials Manufactured via 3D Printing of Metal Oxide Powders,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. 6-8, 2007.

40.  Williams, C.B., Rosen, D.W., 'Manufacturing Cellular Materials via Three-Dimensional Printing of Metal Oxide Powders,' Virtual and Rapid Prototyping (VRAP) Conference, Leiria, Portugal, Sept. 2007.

41.  Mocko, G, Rosen, D.W., Mistree, F., “Decision Retrieval and Storage Enabled Through Description Logic,” Proc. ASME Computers and Information in Engineering Conference, paper #DETC2007-35644, Las Vegas, NV, Sept. 4-7, 2007.

42.  Yim, S., Rosen, D.W., “Case-Based Retrieval Approach of Supporting Process Planning in Layer-Based Additive Manufacturing,” Proc. ASME Computers and Information in Engineering Conference, paper #DETC2007-35309, Las Vegas, NV, Sept. 4-7, 2007.

43.  Wilson, J.O., Rosen, D.W., “Systematic Reverse Engineering of Biological Systems,” Proc. ASME Design Theory and Methodology Conference, paper #DETC2007-35395, Las Vegas, NV, Sept. 4-7, 2007.

44. Yim, S., Wilson, J.O., Rosen, D.W., “Development of an Ontology for Bio-Inspired Design using Description Logics,” PLM’08 Conference, Seoul, Korea, July 9-11, 2008.

45. Rosen, D.W, Margolin, L., Vohra, S., “Printing High Viscosity Fluids via Ultrasonic Droplet Generation,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. 4-6, 2008.

 46. Jariwala, W., Ding, F., Zhao, X., Rosen, D.W., “A Thick Film Fabrication Process on Transparent Substrate using Mask Projection Micro-Stereolithography,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. 4-6, 2008.

47. Williams, C.B., Mistree, F., Rosen, D.W., “A Functional Classification Framework for the Conceptual Design of Layered Manufacturing Technologies,” ASME Design for Manufacturing and Life Cycle Conference, paper DETC2008-49353, Brooklyn, NY, Aug. 3-6, 2008.  Best paper award.

48. Williams, C.B., Mistree, F., Rosen, D.W., “The Systematic Design of a Layered Manufacturing Process for the Realization of Metallic Parts of Designed Mesostructure,” ASME Design Education Conference, paper DETC2008-49457, Brooklyn, NY, Aug. 3-6, 2008. 

49. Graf, G.C., Chu, J., Engelbrecht, S., Rosen, D.W., “Synthesis Methods for Lightweight Lattice Structures,“ ASME Computers & Information in Engineering Conference, paper #DETC2009-86993, San Diego, Aug 31 - Sept 2, 2009. Best paper award.

50. Wilson, J., Chang, P., Yim, S., Rosen, D.W., “Developing a Bio-inspired Design Repository using Ontologies,” ASME Design Theory and Methodology Conference, paper #DETC2009-87272, San Diego, Aug 31 - Sept 2, 2009.

51. Jariwala, A.S., Ding, F., Zhao, X., Rosen, D.W., “A Process Planning Method for Thin Film Mask Projection Micro-Stereolithography Methods for Lightweight Lattice Structures,” ASME Computers & Information in Engineering Conference, paper #DETC2009-87532, San Diego, Aug. 30- 31 - Sept 2, 2009.

Book Chapters

1.     Bauer, M. D., Siddique, Z., and Rosen, D. W., “Virtual Prototyping In Simultaneous Product/Process Design For Disassembly.”  Book chapter in: Rapid Response Manufacturing: Contemporary Methodologies, Tools and Technologies, Ed. John Dong, Chapman & Hall, 1997.

2.     Rosen, D.W., “Design-to-Manufacture Information Transfer in the Context of Solid Freeform Fabrication Technologies.” Book chapter in: Knowledge Intensive Computer Aided Design, Ed. S. Finger, T Tomiyama, and M. Mantyla, Kluwer Academic Publishers, Boston, 2000.

3.     Ebert-Uphoff, I., Gosselin, C.M., Rosen, D.W., and Laliberte, T., “Rapid Prototyping for Robotics.” Book chapter in: Cutting Edge Robotics, Advanced Robotic Systems, International, 2005.

4.     Rosen, D.W. and Gibson, I., “Decision Support and System Selection for RP,” Book chapter in Software Solutions for RP, Ed. I. Gibson, Professional Engineering Publishing, Ltd., UK, 2002.

5.     Siddique, Z. and Rosen, D.W., “Common Platform Architecture: Identification for a Set of Similar Products,” Chapter 9 in: The Customer Centric Enterprise: Advances in Mass Customization and Personalization, Ed. M. Tseng and F. Pillar, Springer, New York/Berlin, pp. 163-182, 2003.

6.     Allen, J.K., Bras, B., Mistree, F., Paredis, C., Rosen, D.W., “Georgia Institute of Technology: The Systems Realization Laboratory,” Chap. 26 in Design Process Improvement – A Review of Current Practice, Clarkson, P. J.; Eckert, C. (Eds.), pp. 490-493, 2005.

7.     Williams, C.B., Allen, J.K., Rosen, D.W., Mistree, F., “Process Parameter Platform Design to Manage Workstation Capacity,” Simpson, T. W., Siddique, Z. and Jiao, J., Eds., Product Platform and Product Family Design: Methods and Applications, Springer, New York, pp. 421-456, 2005.

8.     Wilson, J. and Rosen, DW,  Design for Rapid Manufacturing under Epistemic Uncertainty," Rapid Prototyping: Theory and Practice, eds.: Kamrani, A., Springer (in print).

9.     Panchal, J.H., Choi, H-J., Allen, J.K., Rosen, D., Mistree, F., “An Adaptable Service-based Framework for Distributed Product Realization,” Collaborative Product Design and Manufacturing Methodologies and Applications, Eds. W.D. Li, S.K. Ong, A.Y.C. Nee, C.A. McMahon, Springer-Verlag, pp. 1-37, 2007.

 

Students

Current Students:

    • Patrick Chang (MS)
    • Amit Jariwala (Ph.D.)
    • Namin Jeong (Ph.D.)
    • Jane Kang (Ph.D.)
    • George Mathai (Ph.D. co-advised with Dr. Shreyes Melkote)
    • Wenzhao Zhou (Ph.D.)

Former Students:

    • Ted Anderson (MS, Arcam)
    • Matthew Bauer (MS, Alventive)
    • Yong Chen (Ph.D.  University of Southern California)
    • Brian Corbett (MS, Bell Helicopter)
    • Stewart Coulter  (MS, Bosch)
    • Chen (Jane) Chu (MS, Michelin)
    • Sarah Engelbrecht (MS, Northrup-Grumman)
    • Chris Franck (MS, Motorola)
    • Greg Graf (MS, Link Systems)
    • Brian Harper (MS, Mercer University)
    • Steve Hassenzahl  (MS, NCR)
    • Sundiata Jangha (MS,  University of Maryland, Baltimore County)
    • Alok Kataria (MS, Velant)
    • Ameya Limaye  (Ph.D.  Intel)
    • Charity Lynn-Charney  (MS, Kimberley-Clark)
    • Lauren Margolin  (MS, Lutron)
    • Joel McClurkin (MS, Schlumberger)
    • Greg Mocko  (Ph.D. Clemson University)
    • Patrick Newcomb  (MS, GA Gov't)
    • Austina Nguyen  (MS, Lexmark)
    • Jeff Olson (MS)
    • Jae-Hyoung Park (MS, Samsung)
    • Scott Pierce  (Ph.D., Sweet Briar College)
    • Benay Sager  (Ph.D.  McKinsey)
    • Shiva Sambu (MS, Align Technology)
    • Zahed Siddique  (Ph.D. Univ. of Oklahoma)
    • L. Angela Tse  (Ph.D.  Schlumberger)
    • Nsikan Udoyen  (Ph.D. Intel)
    • Hongqing Vincent Wang (Ph.D.  3D Systems)
    • Aaron West  (MS, Northrup-Grumman)
    • Chris Williams (MS, Ph.D., Virginia Tech)
    • Jamal Wilson (Ph.D., Whirlpool)
    • Sungshik Yim  (Ph.D.  3D Systems)
    • Xiayun Zhao (MS, WorleyParsons)

Current Post-Docs

    • Fei Ding

Former Post-Docs

    • Scott Johnston (Boeing)
    • Mark Meacham
    • Sanjay Vohra
    • Yong Yang (GE Shanghai)

 

Created by drosen
Last modified 07/07/2012 11:16 PM
« July 2014 »
Su Mo Tu We Th Fr Sa
    1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31    
Log in
 
 

Powered by Plone