Skip to content
Sections
Personal tools
You are here: Home » Members » drosen's Home
 

Home Page for David Rosen

This is a personal page listing the member's contact information, research interests, publications, and other information.

Contact Information

Status:

Professor in Mechanical Engineering

Associate Chair for Graduate Studies in ME

Director of the Rapid Prototyping & Manufacturing Institute

Office:

Manufacturing Research Center (MaRC), Room 252                          
Georgia Institute of Technology
813 Ferst Drive, NW
Atlanta, Georgia 30332-0405

Phone: (404) 894-9668

Fax:      (404) 894-9342

Email:   mailto:david.rosen@me.gatech.edu

URL:     www.srl.gatech.edu/Members/drosen

 

 

 

 

Research Interests

Computer-aided product development, with an emphasis on design methodology, CAD/CAM/CAE, additive manufacturing, rapid prototyping, and personalized manufacturing.

 

Education

Ph.D., Mechanical Engineering. 1992
Advisor: Dr. John R. Dixon
Ph.D. Dissertation Title: A Feature-Based Representation to Supportthe Design Process and the Manufacturability Evaluation of Mechanical Components.

Positions Held

  • The George W. Woodruff School of Mechanical Engineering, Associate Chair for Graduate Studies, May 2007 - present.
  • Loughborough University, UK, School of Mechanical and Manufacturing Engineering.  Visiting Professor, 2005.
  • The George W. Woodruff Schoolof Mechanical Engineering,Georgia Institute of Technology, Atlanta,Georgia. September 1992 - present
     Professor as of July 2004
  • The George W. Woodruff School of Mechanical Engineering, GeorgiaInstitute of Technology, Atlanta, Georgia. Summer 1992.
    Instructor for ME 3110
  • Department of Mechanical Engineering, University of Massachusetts,Amherst, MA 1989 - 1992.
    Graduate Research Assistant.
  • Ford Motor Company, Ford ScientificResearch Laboratory, Dearborn, MI. 1990. Visiting Research Scientist
  • Computervision Corporation and Prime Computer, Bedford, MA.1987 - 1989.
    Software Engineer.

RMSelect Downloads

RMSelect User Manual

RMSelect Software (80MB Zip file)

 

Publications

 

Journal Articles

1.     Rosen, D. W., Bras, B. A., Hassenzahl, S. L., Newcomb, P. J., Yu, T., “Towards Computer-Aided Configuration Design for the Life Cycle,” J. of Intelligent Manufacturing. Vol. 7, pp. 145-60, 1996.

2.     Rosen, D. W. and Peters, T. J., “The Role of Topology in Engineering Design Research,” Research in Engineering Design, Vol 8, No. 2. pp. 81-98, 1996.

3.     Coulter, S. L., Bras, B., and Rosen, D. W., “Formulating and Solving Parametric Design Problems involving Non-Interference Constraints,” Engineering with Computers, Vol. 13, pp. 112-24, 1997. Also a conference publication: IV.B.21.

4.     Koenig, P C, Duffey, M R, Rosen, D W, Singh, P, “Design Infrastructure in Shipbuilding and Other Heavy Industries,” Transactions of the Society of Naval Architects and Marine Engineers.  Vol. 104, pp. 191-217, 1997. Also a conference publication: IV.B.29.

5.     Siddique, Z, Rosen, D W, “Automated Product Disassembly Reasoning,” Computer-Aided Design, vol. 29, no. 12, pp. 847-860, 1997.

6.     Simpson, T.W., Rosen, D W, Allen, J K, Mistree, F, “Metrics for Assessing Design Freedom and Information Certainty in the Early Stages of Design,” ASME Journal of Mechanical Design, Vol. 120, pp. 628 – 635, December 1998. Also a conference publication: IV.B.28.

7.     McClurkin, J. E. and Rosen, D. W., “Computer-Aided Build Style Decision Support for Stereolithography,” Rapid Prototyping Journal, Vol. 4, No. 1, pp. 4-13, 1998.

8.     Newcomb, P J, Bras, B A, Rosen, D W, “Implications of Modularity on Product Design for the Life Cycle,” ASME J. of Mechanical Design. Vol. 120, No. 3, pp. 483-90, September 1998. Also a conference publication: IV.B.26.

9.     Bauer, M. D., Siddique, Z., and Rosen, D. W., “A Virtual Prototyping System for Design for Assembly, Disassembly, and Service,” J. of Agile Manufacturing, Vol. 2, No. 2, pp. 119-138, 1999.

10.  Han, J.-H. and Rosen, D. W., “Special Panel Session for Feature Recognition at the 1997 ASME Computers in Engineering Conference,” Computer-Aided Design, Vol. 30, No. 13, pp. 979-981, 1998.

11.  Bauer, M. D. and Rosen, D. W., “A Modified Pattern Search Method with Relaxed Lexicographic Minimization for Engineering Design,” Engineering Optimization, Vol. 32, pp. 219-247, 1999.

12.  Lynn-Charney, C.M. and Rosen, D.W., “Accuracy Models and Their Use in Stereolithography Process Planning,” Rapid Prototyping Journal, Vol. 6, No. 2, pp. 77-86, 2000.

13.  Harper, B. D. and Rosen, D. W., “Computer-Aided Design for Product De- & Remanufacture,” J. of Design and Manufacturing Automation, Vol. 4, No. 1, pp. 37-46, 2001.

14.  Siddique, Z. and Rosen, D.W., “On Discrete Design Spaces for the Configuration Design of Product Families,” Artificial Intelligence in Engineering, Design, Automation, and Manufacturing, Vol. 15, pp. 1-18, 2001.

15.  West, A.P., Sambu, S., and Rosen, D.W., “ A Process Planning Method for Improving Build Performance in Stereolithography,” Computer-Aided Design, Vol. 33, No. 1, pp. 65-80, 2001.

16.  Dutta, D., Prinz, F.B., Rosen, D., and Weiss, L., “Layered Manufacturing: Current Status and Future Trends,” ASME Journal of Computing and Information Science in Engineering, Vol. 1, No. 1, pp. 60-71, 2001.

17.  Hemrick, J., Starr, T., and Rosen, D., “Release Behavior for Powder Injection Molding in Stereolithography Molds,” Rapid Prototyping Journal, Vol. 7, No. 2, pp. 115 – 121, 2001.

18.  Gerhard, J.F., Rosen, D., Allen, J.K., and Mistree, F., “A Distributed Product Realization Environment for Design and Manufacturing,” ASME Journal of Computing and Information Science in Engineering, Vol. 1, No. 3, pp. 235-244, 2001.

19.  Kataria, A. and Rosen, D.W., “Building Around Inserts: Methods for Fabricating Complex Devices in Stereolithography,” Rapid Prototyping Journal, Vol. 7, No. 5, pp. 253-261, 2001.

20.  Chen, Y. and Rosen, D.W., “A Region Based Method to Automated Design of Multi-Piece Molds with Application to Rapid Tooling,” ASME Journal of Computing and Information Science in Engineering, Vol. 2, No. 2, pp. 86-97, 2002.

21.  Tse, L.A., Hesketh, P.J., Rosen, D.W., Gole, J.L., “Stereolithography on Silicon for Microfluidics and Microsensor Packaging,” Microsystem Technologies, Vol. 9, pp. 319-323, 2003.

22.  Chen, Y. and Rosen, D.W., “A Reverse Glue Approach to Automated Construction of Multi-Piece Molds With Application to Rapid Tooling,” ASME Journal of Computing and Information Science in Engineering, Vol. 3, No. 3, pp. 219-230, 2003.

23.  Rosen, D.W., Chen, Y., Sambu, S., Allen, J.K., Mistree, F., “The Rapid Tooling Testbed: A Distributed Design-for-Manufacturing System,” Rapid Prototyping Journal, Vol. 9, No. 3, pp. 122-132, 2003.

24.  Corbett, B. and Rosen, D.W., “A Configuration Design Based Method for Platform Commonization for Product Families,” Artificial Intelligence in Engineering, Design, Automation, and Manufacturing, Vol. 18, No. 1, pp. 21-39, 2004.

25.  Sambu, S., Chen, Y., and Rosen, D.W., “Geometric Tailoring:  A Design For Manufacturing Method for Rapid Prototyping and Rapid Tooling,” ASME Journal of Mechanical Design, Vol. 126, No. 4, pp. 571-580, 2004.

26.  Chan, D.C.N., Frazier, K.B., Tse, L.A., Rosen, D.W., “Application of Rapid Prototyping to Operative Dentistry Curriculum,” Journal of Dental Education, Vol. 68, No. 1, pp. 64-70, 2004.

27.  Tang, Y, Henderson, C, Muzzy, J., Rosen, D.W., “Stereolithography Cure Modeling and Simulation,” Int. J. Materials and Product Technology, Vol. 21, No. 4, pp.255-272, 2004.

28.  Xiao, A., Zeng, S., Allen, J.K., Rosen, D.W., Mistree, F., “Collaborative Multidisciplinary Decision Making using Game Theory and Design Capability Indices,” Research in Engineering Design, Vol. 16, No. 1, pp. 57-72, 2005.

29.  Fernández, M.G., Seepersad, C.C., Rosen, D.W., Allen, J.K., Mistree, F., “Decision Support in Concurrent Engineering – The Utility-Based Selection Decision Support Problem,” Concurrent Engineering: Research & Applications, Vol. 13, No. 1, pp. 13-28, 2005.

30.  Khosrowjerdi, M., Kinzel, G.L., Rosen, D.W., “Computers in Education: Activities, Contributions, and Future Trends,” ASME J. of Computing and Information Science in Engineering, Vol. 5, No. 3, pp. 257-263, 2005.

31.  Limaye, A, Rosen, D.W., “Process Planning Method for Mask Projection Micro-Stereolithography,” Rapid Prototyping Journal, Vol. 13, No. 2, pp. 76-84, 2007.

32.  Limaye, A, Rosen, D.W., “Compensation zone approach to avoid Z errors in Mask Projection Stereolithography builds,” Rapid Prototyping Journal, Vol.12, No. 5, pp. 283-291, 2006.

33.  Pierce, RS, Rosen, DW, “A Method for Integrating Form Errors Into Geometric Tolerance Analysis,” accepted in ASME Journal of Mechanical Design, 12/06.

34.  An, N., Lu, J.-C., and Rosen, D. (2006), “Supply-Chain Oriented Robust Parameter Design,” International Journal of Production Research – Special Issue on Advances on Quality Engineering (accepted).

35.  Xiao, A., Allen, J.K., Rosen, D.W., Mistree, F. “An Application of Game Theory in collaborative Decision Making Across Digital Interfaces,” Engineering with Computers, accepted 10/06.

36.  Xiao, A.; Seepersad, C. C.; Allen, J.K.; Rosen, D. W.; Mistree, F., “Design for manufacturing: application of collaborative multidisciplinary decision-making methodology,” Engineering Optimization, Vol. 39 Issue 4, p. 429-451, 2007.

37.  Pierce, RS, Rosen, DW, “Simulation of Mating Between Non-Analytic Surfaces Using a Mathematical Programming Formulation,” accepted in ASME J. of Computing and Information Science in Engineering, 12/06.

38.  Choi, H-J, McDowell, DL, Allen, JK, Rosen, DW, Mistree, F, “An Inductive Design Exploration Method for Robust Multiscale Materials Design,” accepted in ASME J. of Mechanical Design, 12/06.

39.  Chen, Y., Wang, H., Rosen, D.W., Rossignac, J., “A Point-Based Offsetting Method of Polygonal Meshes,” accepted in ASME J. of Computing and Information Science in Engineering, 1/07.

40.  Rosen, D.W., “Computer-Aided Design for Additive Manufacturing of Cellular Structures,” Computer-Aided Design & Applications, Vol. 4, No. 5, 585-594, 2007.


Refereed Conference Papers

1.     Panchal, J.H., Chamberlain, M.K., Rosen, D.W., Allen, J.K., Mistree, F.  “A Service Based Architecture for Information and Asset Utilization in Distributed Product Realization,” AIAA Conference, Atlanta, 2002.

2.     Sambu, S., Chen, Y., and Rosen, D.W., “Geometric Tailoring:  A Design For Manufacturing Method for Rapid Prototyping and Rapid Tooling,” ASME Design for Manufacturing Conference, DETC2002/DFM-34169, Montreal, Sept. 29-Oct 2, 2002.

3.     Wang, H. and Rosen, D.W., “Parametric Modeling Method for Truss Structures,” ASME Computers and Information in Engineering Conference, DETC2002/CIE-34495, Montreal, Sept. 29-Oct 2, 2002.

4.     Fernandez, M., Rosen, D.W., Allen, J.K., and Mistree, F., “Digital Interfaces: The Key to Effective Decision-Making in Distributed Collaborative Design and Manufacture,” ASME Computers and Information in Engineering Conference, DETC2002/CIE-34466, Montreal, Sept. 29-Oct 2, 2002

5.     Kulkarni, R., Rosen, D.W., Allen, J.K., and Mistree, F., “An Information Model for Finding and Integrating Distributed Resources for Engineering Design-Manufacturing Processes,” ASME Computers and Information in Engineering Conference, DETC2002/CIE-34464, Montreal, Sept. 29-Oct 2, 2002.

6.     Xiao, A., Choi, H-J., Allen, J.K., Rosen, D.W., Mistree, F., “Collaborative Decision Making across Digital Interfaces,” ASME Design Automation Conference, DETC2002/DAC-34073, Montreal, Sept. 29-Oct 2, 2002.

7.     Rosen, D.W., Chen, Y., Sambu, S., Allen, J.K., Mistree, F., “The Rapid Tooling Testbed: A Distributed Design-for-Manufacturing System,” Int’l Conference on Manufacturing Automation, Eds. ST Tan, I Gibson, YH Chen, pp. 491-499, Hong Kong, Dec. 10-12, 2002.

8.     Wang, H. and Rosen, D.W., “Computer-Aided Design Methods for Additive Fabrication of Truss Structures,” Int’l Conference on Manufacturing Automation, Eds. ST Tan, I Gibson, YH Chen, pp. 117-126, Hong Kong, Dec. 10-12, 2002.

9.     Williams, C. B., Panchal, J.H., and Rosen, D.W., “A General Decision-Making Method for the Rapid Manufacture of Customized Parts,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-48198, Chicago, Sept. 2-6, 2003.

10.  Chen, Y. and Rosen, D.W., “A Reverse Glue Approach to Automated Construction of Multi-Piece Molds,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-4817, Chicago, Sept. 2-6, 2003.

11.  Jangha, S. and Rosen, D.W., “EMEDS: A System to Determine Ejection Layout for Rapid-Tooled Injection Molds,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-48193, Chicago, Sept. 2-6, 2003.

12.  Park, J-H. and Rosen, D.W., “Generation of Process Plans for Laser Chemical Vapor Deposition,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-48187, Chicago, Sept. 2-6, 2003.

13.  Rosen, D.W., Nguyen, A., and Wang, H., “On the Geometry of Low Degree-of-Freedom Digital Clay Human-Computer Interface Devices,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-48295, Chicago, Sept. 2-6, 2003.

14.  Choi, H-J., Panchal, J.H., Allen, J.K., Rosen, D.W., Mistree, F. “Towards a Standardized Engineering Framework for Distributed, Collaborative Product Realization,” Proceedings ASME Computers and Information in Engineering Conference, paper DETC2003/CIE-48279, Chicago, Sept. 2-6, 2003.

15.  Corbett, B. and Rosen, D.W., “Platform Commonization with Discrete Design Spaces: Introduction of the Flow Design Space,” Proceedings ASME Design Theory and Methodology Conference, paper DETC2003/DTM-48678, Chicago, Sept. 2-6, 2003.

16.  Johnson, R.W., Park, J-H., Lackey, W.J., Rosen, D.W., “Advances in Laser Chemical Vapor Deposition of Metals and Ceramics,” Proceedings Int’l Conference on Advanced Research in Virtual and Rapid Prototyping, Eds. PJ Bartolo and G Mitchell, Leiria, Portugal, Oct. 1-4, 2003.

17.  Tang, Y., Henderson, C., Muzzy, J., Rosen, D.W., “Stereolithography Cure Modeling and Simulation,”  Proceedings Int’l Conference on Advanced Research in Virtual and Rapid Prototyping, Eds. PJ Bartolo and G Mitchell, Leiria, Portugal, Oct. 1-4, 2003.

18.  Limaye, A., Rosen, D.W., “Quantifying Dimensional Accuracy of a Mask Projection Micro Stereolithography System,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 2-4, 2004.

19.  Sager, B., Rosen, D.W., “On the Use of Angled, Dynamic Laser Beams to Improve Stereolithography Surface Finish,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 2-4, 2004.

20.  Tang, Y, Henderson, C.L., Muzzy, J.D., Rosen, D.W., “Stereolithography (SL) Cure Process Modeling Using Acrylate Resins,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 2-4, 2004.

21.  Williams, C.B., Allen, J.K., Rosen, D., Mistree, F., “Designing Platforms for Customizable Products in Markets with Non-Uniform Demand,” Proc. ASME Design Theory and Methodology Conference, paper #DETC2004-57469, Salt Lake City, Sept 29-Oct 1, 2004.

22.  Gao, F., Hong, S, Rosen, D.W., “Feature-Based Geometric Modeling Approach to Surface Micromachining MEMS,” Proc. ASME Computers and Information in Engineering Conference, paper #DETC2004-57692, Salt Lake City, Sept 29-Oct 1, 2004.

23.  Limaye, A, Rosen, D.W., “Compensation zone approach to avoid Z errors in Mask Projection Stereolithography builds,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 1-3, 2005 (Outstanding Paper Award).

24.  Sager, B., Rosen, D.W., “Use of Parameter Estimation For Stereolithography Surface Finish Improvement,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 1-3, 2005.

25.  Williams, C.B., Allen, J.K., Rosen, D., Mistree, F., “Towards the Design of a Layer-Based Additive Manufacturing Process for the Realization of Metal Parts of Designed Mesostructure,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 1-3, 2005.

26.  Pierce, RS, Rosen, DW, “Simulation of Mating Between Non-Analytic Surfaces Using a Mathematical Programming Formulation,” Proc. ASME Computers and Information in Engineering Conference, paper DETC2005-84342, Long Beach, CA, Sept 24-28, 2005.

27.  Pierce, RS, Rosen, DW, “A Method for Integrating Form Errors Into Geometric Tolerance Analysis,” Proc. ASME Design Automation Conference, paper DETC2005-84343, Long Beach, CA, Sept 24-28, 2005.

28.  Rosen, DW, Nguyen, AN, “Simulation Methods for Formable Crust Skins of Digital Clay Human-Computer Interface Devices,” Proc. ASME Computers and Information in Engineering Conference, paper DETC2005-84455, Long Beach, CA, Sept 24-28, 2005.

29.  Chen, Y, Wang, H, Rosen, DW, Rossignac, J, “Filleting and Rounding using a Point-Based Method,” Proc. ASME Design Automation Conference, paper DETC2005-DAC85408, Long Beach, CA, Sept 24-28, 2005.

30.  Wang, H, Chen, Y, Rosen, DW, “A Hybrid Geometric Modeling Method for Large Scale Conformal Cellular Structures, Proc. ASME Computers and Information in Engineering Conference, paper DETC2005-85366, Long Beach, CA, Sept 24-28, 2005.  Best Paper Award.

31.  Wilson, J., Rosen, D.W., “Selection for Rapid Manufacturing under Epistemic Uncertainty,” Proc. ASME Design Automation Conference, paper DETC2005/DFMLC-85264, Long Beach, CA, Sept 24-28, 2005.

32.  Choi, H-J, Allen, JK, Rosen, DW, McDowell, DL, Mistree, F, “An Inductive Design Exploration Method for the Integrated Design of Multi-scale Materials and Products,” Proc. ASME Design Automation Conference, paper DETC2005-85335, Long Beach, CA, Sept 24-28, 2005.

33.  Williams, C.B., Mistree, F., Rosen, D.W., “Investigation of Additive Manufacturing Processes for the Manufacture of Parts with Designed Mesostructure,” Proc. ASME Design for Manufacturing Conference, paper DETC2005/DFMLC-84832, Long Beach, CA, Sept 24-28, 2005.

34.  Tse, L.A., Rosen, D.W., “3D Membrane Electrode Assemblies (MEAs) for Direct Methanol Fuel Cells,” ASME IMECE, paper IMECE2005-81843, Orlando, Nov. 5-11, 2005.

35.  Wang, H., Johnston, S.J., Rosen, D.W., “Design of a Graded Cellular Structure for an Acetabular Hip Replacement Component, Solid Freeform Fabrication Symposium, Austin, TX, pp. 111-123, Aug. 14-16, 2006.

36.  Mocko, G., Rosen, D.W., Mistree, F., “A Critical Analysis of Description Logics for Engineering Information Management,” ASME Computers in Engineering Conference, paper #DETC2006-99473, Philadelphia, Sept. 10-13, 2006.

37.  Udoyen, N., Rosen, D.W., Mistree, F., “Description Logic Representation of Finite Element Analysis Models for Automated Retrieval,” ASME Computers in Engineering Conference, paper #DETC2006-99451, Philadelphia, Sept. 10-13, 2006.

38.  Wang, H., Rosen, D.W., “An Automated Design Synthesis Method for Compliant Mechanisms with Application to Morphing Wings,” ASME Mechanisms Conference, paper #DETC2006-99661, Philadelphia, Sept. 10-13, 2006.

39.  Williams, C.B., Rosen, D.W., “Cellular Materials Manufactured via 3D Printing of Metal Oxide Powders,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. 6-8, 2007.

40.  Williams, C.B., Rosen, D.W., 'Manufacturing Cellular Materials via Three-Dimensional Printing of Metal Oxide Powders,' Virtual and Rapid Prototyping (VRAP) Conference, Leiria, Portugal, Sept. 2007.

41.  Mocko, G, Rosen, D.W., Mistree, F., “Decision Retrieval and Storage Enabled Through Description Logic,” Proc. ASME Computers and Information in Engineering Conference, paper #DETC2007-35644, Las Vegas, NV, Sept. 4-7, 2007.

42.  Yim, S., Rosen, D.W., “Case-Based Retrieval Approach of Supporting Process Planning in Layer-Based Additive Manufacturing,” Proc. ASME Computers and Information in Engineering Conference, paper #DETC2007-35309, Las Vegas, NV, Sept. 4-7, 2007.

43.  Wilson, J.O., Rosen, D.W., “Systematic Reverse Engineering of Biological Systems,” Proc. ASME Design Theory and Methodology Conference, paper #DETC2007-35395, Las Vegas, NV, Sept. 4-7, 2007.

Book Chapters

1.     Bauer, M. D., Siddique, Z., and Rosen, D. W., “Virtual Prototyping In Simultaneous Product/Process Design For Disassembly.”  Book chapter in: Rapid Response Manufacturing: Contemporary Methodologies, Tools and Technologies, Ed. John Dong, Chapman & Hall, 1997.

2.     Rosen, D.W., “Design-to-Manufacture Information Transfer in the Context of Solid Freeform Fabrication Technologies.” Book chapter in: Knowledge Intensive Computer Aided Design, Ed. S. Finger, T Tomiyama, and M. Mantyla, Kluwer Academic Publishers, Boston, 2000.

3.     Ebert-Uphoff, I., Gosselin, C.M., Rosen, D.W., and Laliberte, T., “Rapid Prototyping for Robotics.” Book chapter in: Cutting Edge Robotics, Advanced Robotic Systems, International, 2005.

4.     Rosen, D.W. and Gibson, I., “Decision Support and System Selection for RP,” Book chapter in Software Solutions for RP, Ed. I. Gibson, Professional Engineering Publishing, Ltd., UK, 2002.

5.     Siddique, Z. and Rosen, D.W., “Common Platform Architecture: Identification for a Set of Similar Products,” Chapter 9 in: The Customer Centric Enterprise: Advances in Mass Customization and Personalization, Ed. M. Tseng and F. Pillar, Springer, New York/Berlin, pp. 163-182, 2003.

6.     Allen, J.K., Bras, B., Mistree, F., Paredis, C., Rosen, D.W., “Georgia Institute of Technology: The Systems Realization Laboratory,” Chap. 26 in Design Process Improvement – A Review of Current Practice, Clarkson, P. J.; Eckert, C. (Eds.), pp. 490-493, 2005.

7.     Williams, C.B., Allen, J.K., Rosen, D.W., Mistree, F., “Process Parameter Platform Design to Manage Workstation Capacity,” Simpson, T. W., Siddique, Z. and Jiao, J., Eds., Product Platform and Product Family Design: Methods and Applications, Springer, New York, pp. 421-456, 2005.

8.     Wilson, J. and Rosen, DW,  “Design for Rapid Manufacturing under Epistemic Uncertainty," Rapid Prototyping: Theory and Practice, eds.: Kamrani, A., Springer (in print).

9.     Panchal, J.H., Choi, H-J., Allen, J.K., Rosen, D., Mistree, F., “An Adaptable Service-based Framework for Distributed Product Realization,” Collaborative Product Design and Manufacturing Methodologies and Applications, Eds. W.D. Li, S.K. Ong, A.Y.C. Nee, C.A. McMahon, Springer-Verlag, pp. 1-37, 2007.

Non-Refereed Conference Papers

16.     Tse, L.A., Seals, L., Hesketh, P.J., Gole, J. and Rosen, D.W., “Rapid Prototyping of Microfluidic Components and Packaging for Microsystems,” Spring ECS Meeting, March 2002.

17.     Tse, L.A., P. J. Hesketh J. L. Gole, and D. W. Rosen, “Stereolithography on Silicon for Microfluidics and Microsensor Packaging,”  Proceedings of the 201st Meeting of the Electrochemical Society, Philadelphia, pg. 1552, May, 2002.

18.     Tse, L.A., D. W. Rosen, J. L. Gole and P. J. Hesketh “Stereolithography on Silicon for Microfluidics and Microsensor Packaging,” Microfabricated Systems and MEMS- VI, Proceedings Volume 2002- 6 , (The  Electrochemical Society, New Jersey), pg. 136-143, 2002.

19.     Sager, B. and Rosen, D.W., “Stereolithography Process Resolution,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 5-7, 2002.

20.     Park, J-H. and Rosen, D.W., “Issues in Process Planning for Laser Chemical Vapor Deposition,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 5-7, 2002.

21.     Rosen, D.W., “Design for the Environment and Recycling,” (invited talk) Japan-America Frontiers of Engineering Symposium, National Academy of Engineering, Tokyo, Japan, Oct. 24-26, 2002.

22.     Panchal, J.H., Rosen, D.W., Allen, J.K., and Mistree, F.   “A Computer Framework for Robust Concept Exploration in a Distributed Environment,” 47th Congress of Indian Society of Theoretical and Applied Mechanics, Indian Institute of Technology, Guwahati, India December 23-26, 2002.

23.     Rosen, D.W., Nguyen, A.N., Wang, H. “Stereolithography Skins for Digital Clay: Enabling a 3-D Deformable Computer Display,” 3D Systems North American Stereolithography Users Group Conference, Destin, FL, March 24-27, 2003.

24.     Rossignac, J., M. Allen, W.J. Book, A. Glezer, I. Ebert-Uphoff, C. Shaw, D. Rosen, S. Askins, J. Bai, P. Bosscher, J. Gargus, B. Kim, I. Llamas, A. Nguyen, G. Yuan, H. Zhu, “Finger Sculpting with Digital Clay: 3D Shape Input and Output through a Computer-Controlled Real Surface,” Shape Modeling International Conference, Korea, Seoul, May 12-16, 2003.

25.     Sager, B., Shilling, M., Kurfess, T.R., Rosen, D.W., “Experimental Studies in Stereolithography Resolution,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 4-6, 2003.

26.     Layton, A. and Rosen, D.W., “The Effect of Layer Orientation on the Tensile Properties of Net Shape Parts Fabricated in Stereolithography,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 4-6, 2003.

27.     Rosen, D.W., “Process Control and Metrics,” Additive/Subtractive Manufacturing Workshop, NSF, Dec. 2, 2003.

28.     Rosen, D.W., “Energy and Environment,” Additive/Subtractive Manufacturing Workshop, NSF, Dec. 2, 2003.

29.     Newcomb, P.J., Rosen, D.W., Bras, B., “Life Cycle Modularity Metrics,” Proc. EcoDesign 2003, 3rd International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Dec. 8-11, 2003, Tokyo, Japan.

30.     Rosen, D.W., Atwood, C., Beaman, J., Bourell, D., Bergman, T., Hollister, S., “Results of WTEC Additive/Substractive Manufacturing Study of European Research,” Proc. SME Rapid Prototyping & Manufacturing Conference, paper # TP04PUB211, Dearborn, MI, May 10-13, 2004.

31.     Layton, A, Rosen, D.W., “How to Get from Here to There in Rapid Manufacturing,” Proc. SME Rapid Prototyping & Manufacturing Conference, Dearborn, MI, May 10-13, 2004.

32.     Rosen, D.W., “Toward Reconfigurable Additive Manufacturing Systems,” Proc. Japan-USA Symposium on Flexible Automation, paper US-002, Denver, CO, July 19-21, 2004.

33.     Rosen, D.W., “Overview of the WTEC Additive/Subtractive Manufacturing Study of European Research,” Proc. Solid Freeform Fabrication Symposium, Austin, TX, Aug. 2-4, 2004.

34.     Rosen, D.W., “Direct Digital Manufacturing: Issues and Tools for Making Key Decisions,” Proc. SME Rapid Prototyping & Manufacturing Conference, Dearborn, MI, May 9-12, 2005.

35.     Tse, A., Limaye, A., Rosen, D.W., “MEMS Applications of Stereolithography and Micro-Stereolithography,” Proc. SME Rapid Prototyping & Manufacturing Conference, Dearborn, MI, May 9-12, 2005.

36.     Sager, B., Rosen, D.W., “Development and Use of Analytical Cure Models to Improve Stereolithography Surface Finish,” Proc. Int’l Conference on Advanced Research in Virtual and Rapid Prototyping Conference, Leiria, Portugal, Sept. 28-Oct 1, 2005.

37.     Limaye, A., Rosen, D.W., “Process planning method for curing accurate microparts using Mask Projection Micro Stereolithography,” Proc. Int’l Conference on Advanced Research in Virtual and Rapid Prototyping Conference, Leiria, Portugal, Sept. 28-Oct 1, 2005.

38.     Tse, L.A., Rosen, D.W., “Fabrication of 3D MEA for Power Density Enhancement of PEMFCs,” Ninth Grove Fuel Cell Symposium, London, UK, 4-6 Oct. 2005.

39.     Rosen, D.W., Sager, B., Margolin, L., “Smooth Stereolithography Surfaces,” 3D Systems User Group Confernce, Tucson, AZ, May 1-4, 2006.

40.     Rosen, D.W., Sager, B., Margolin, L., “Smooth Stereolithography Surfaces,” SME Rapid Prototyping & Manufacturing Confernce, St. Charles, IL, May 23-25, 2006.

41.     Rosen, D.W., Johnston, S., Reed, M., Wang, H., “Design of General Lattice Structures for Lightweight and Compliance Applications,” NSF Design, Service, and Manufacturing Grantees and Research Conference, St. Louis, MO, July 25-27, 2006.

42.     Rosen, D.W., Johnston, S., Reed, M., Wang, H., “Synthesis Methods for Structural and Compliant Mesostructured Parts,” Rapid Manufacturing Conference, Loughborough University, July 5-6, 2006.

43.     Johnston, S.R., Reed, M., Wang, H., Rosen, D.W., “Analysis of Mesostructure Unit Cells Comprised of Octet-truss Structures,” Solid Freeform Fabrication Symposium, Austin, TX, pp. 421-432, Aug. 14-16, 2006.

44.     Wang, H.V., Williams, C., Rosen, D.W., “Design Synthesis of Adaptive Mesoscopic Cellular Structures with Unit Truss Approach and Particle Swarm Optimization Algorithm,” Solid Freeform Fabrication Symposium, Austin, TX, pp. 433-445, Aug. 14-16, 2006.

45.     Yim, S., Zhang, Y., Rosen, D.W., “A Repository for Design for Manufacturing Problems using Description Logics,” International Conference on Manufacturing Automation, Singapore, May 28-30, 2007.

46.     Rosen, D.W., “Computer-Aided Design for Additive Manufacturing of Cellular Structures,” Int’l CAD Conference and Exhibition, Honolulu, June 25-29, 2007.

47.     Rosen, D.W., “Design for Additive Manufacturing: A Method to Explore Unexplored Regions of the Design Space,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. 6-8, 2007.

48.     Limaye, A., Rosen, D.W., “Process Planning Method to Cure Mask Projection Stereolithography Parts with Accurate Vertical Dimensions,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. 6-8, 2007.

Students

Current Students:

    • Chen (Jane) Chu (MS)
    • Sarah Engelbrecht (MS)
    • Greg Graf (MS)
    • Amit Jariwala (Ph.D.)
    • Jeff Olsen (MS)
    • Jamal Wilson  (MS, Ph.D.)
    • Xiayun Zhao (MS)

Former Students:

    • Ted Anderson (MS, Arcam)
    • Matthew Bauer (MS, Alventive)
    • Yong Chen  (Ph.D.  University of Southern California)
    • Brian Corbett (MS, Bell Helicopter)
    • Stewart Coulter  (MS, Bosch)
    • Chris Franck (MS, Motorola)
    • Brian Harper (MS)
    • Steve Hassenzahl  (MS, NCR)
    • Sundiata Jangha (MS,  Cessna)
    • Alok Kataria (MS, Velant)
    • Ameya Limaye  (Ph.D.  Intel)
    • Charity Lynn-Charney  (MS, Kimberley-Clark)
    • Lauren Margolin  (MS, Lutron)
    • Joel McClurkin (MS, Schlumberger)
    • Greg Mocko  (Ph.D. Clemson University)
    • Patrick Newcomb  (MS, GA Gov't)
    • Austina Nguyen  (MS, Lexmark)
    • Jae-Hyoung Park (MS, Samsung)
    • Scott Pierce  (Ph.D., Sweet Briar College)
    • Shiva Sambu (MS, Align Technology)
    • Zahed Siddique  (Ph.D. Univ. of Oklahoma)
    • Benay Sager  (Ph.D.  McKinsey)
    • L. Angela Tse  (Ph.D.  Schlumberger)
    • Nsikan Udoyen  (Ph.D. Intel)
    • Hongqing Vincent Wang (Ph.D.  3D Systems)
    • Aaron West  (MS, Northrup-Grumman)
    • Chris Williams (MS, Ph.D., Virginia Tech)
    • Sungshik Yim  (Ph.D.  3D Systems)

Current Post-Docs

    • Fei Ding
    • Sanjay Vohra
    • Yong Yang

Former Post-Docs

    • Scott Johnston (Boeing)
Created by drosen
Last modified 04/19/2008 07:24 PM
« August 2008 »
Su Mo Tu We Th Fr Sa
          1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31            
Log in


Forgot your password?
 
 
Powered by Plone