• Jiang, Y., Ding, F., Zhao, T., and Zhang, J.,2006, “An Elastic-Plastic Finite Element Analysis of Residual Stresses near Notch and Crack tip”, International Conference on Fatigue Damage of Structural Materials, Hyannis, MA,  Sept. 16-22, 2006.
• Ding F., Zhao T. and Jiang, Y., 2006, “A Study of Fatigue Crack Growth with Changing Loading Direction”, 9th International Fatigue Congress, Atlanta, GA, May 14-19, 2006.
• Jiang, Y., Ding, F., Zhao, T., Wang, X., and Gao, Z., 2006, “Multiaxial Fatigue of 16MnR Steel,” Proceedings of PVP2006-ICPVT-11-93473, ASME Pressure Vessels and Piping Division Conference, Vancouver, BC, Canada, July 23-27, 2006.
• Jiang, Y., Ding, F., and Feng, M., 2005, “An Approach for Fatigue Life Predictions,” ASME PVP 2005.
• Jiang, Y., Feng, M., and Ding, F., 2004, “Bridging Crack Initiation and Crack Growth,” International Conference on Fatigue Damage of Structural Materials, Hyannis, MA,  Sept.2004.
• Jiang, Y., Feng, M., and Ding, F., 2003, “A Reexamination of Crack Closure Concept in Fatigue Crack Propagation,” Second International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (34th ASTM National Symposium on Fatigue and Fracture Mechanics), Tampa, FL, Nov.19-21, 2003.

Journal Articles

• Ding, F., Feng, M., and Jiang, Y., 2007, “Modeling of Fatigue Crack Growth from a Notch,” International Journal of Plasticity, Vol. 23, pp. 1167-1188.

• Ding, F., Zhao, T., and Jiang, Y, 2007, “A Study of Fatigue Crack Growth with Changing Loading Direction,” Engineering Fracture Mechanics, Vol. 74, pp. 2014-2029.

• Jiang, Y., Ding, F., and Feng, M., 2007, "An Approach for Fatigue Life Prediction," Journal of Engineering Materials and Technology, Vol. 129, pp. 182-189.

• Feng, M., Ding, F., and Jiang, Y., 2006, “A Study of Loading Path Influence on Fatigue Crack Growth under Combined Loading,” International Journal of Fatigue, Vol. 28, pp. 19-27.

• Feng, M., Ding, F., and Jiang, Y., 2005, “A Study of Crack Growth Retardation due to Artificially Induced Crack Surface Contact,” International Journal of Fatigue, Vol. 27, pp. 1319-1327.

• Jiang, Y., Feng, M., and Ding, F., 2005, “A Reexamination of Crack Closure in Crack Propagation,” International Journal of Plasticity, Vol. 21, pp. 1720-1740.

Master of Science Thesis

• Virtual prototyping development of an embedded MEMS-actuator hard disk drive system.

Ph.D. Dissertation

• A general approach for fatigue life predictions.

Other Information