Skip to content
Sections
Personal tools
You are here: Home » Electronic Library » SRL Bibliography
 

SRL Bibliography

Document Actions

 SRL Bibliography

  1. Hoeller, N., Salustri, F., Deluca, D., Zari, M. P., Love, Z., McKeag, T., Stephens, E., Reap, J. and Sopchak, L. (2007) "Patterns from Nature." in Proceedings of the Proceedings of the 2007 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Springfield, Massachusetts, USA, June 4-6.
  2. Malak, R. J., Aughenbaugh, J. M. and Paredis, C. J. J. (2007) Multi-Attribute Utility Analysis in Set-Based Conceptual Design. Computer Aided Design.[pdf]
  3. Malak, R. J. and Paredis, C. J. J. (2007) "Using Parameterized Pareto Sets to Model Design Concepts." in Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE2007), Seattle, WA, USA. Paper No. IMECE2007-43226. [pdf]
  4. Malak, R. J. and Paredis, C. J. J. (2007) Validating Behavioral Models for Reuse. Research in Engineering Design.[pdf]
  5. Williams, C. B., Allen, J. K., Rosen, D. W. and Mistree, F. (2007) Designing Platforms for Customizable Products and Processes in Markets with Non-Uniform Demand. Concurrent Engineering: Research and Applications - Special Issue on Managing Modularity and Commonality in Product and Process Development, 15(2), 201-216.[pdf]
  6. Williams, C. B. and Rosen, D. W. (2007) "Manufacturing Cellular Materials via Three-Dimensional Printing of Spray-Dried Metal Oxide Ceramic Powder." in Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal. [pdf]
  7. Aughenbaugh, J. M., Duncan, S., Paredis, C. J. J. and Bras, B. (2006) "A Comparison of Probability Bounds Analysis and Decision Analysis in Environmentally Benign Design and Manufacture." in Proceedings of the IDETC/CIE 2006, Philadelphia, PA. Paper No. DETC2006-99230.
  8. Aughenbaugh, J. M. and Paredis, C. J. J. (2006) The Value of Using Imprecise Probabilities in Engineering Design. ASME Journal of Mechanical Design, 128(4), 969-979.[pdf]
  9. Aughenbaugh, J. M. and Paredis, C. J. J. (2006) "Why are Intervals and Imprecision Important in Engineering Design?" in Proceedings of the Reliable Engineering Computing Workshop (REC'06), Savannah, GA, February 22-24. [pdf]
  10. Bras, B. and Reap, J. (2006) "Towards Biologically Inspired Design for Sustainability." in Proceedings of the Sustainable Manufacturing IV Global Conference on Sustainable Product Development and Life Cycle Engineering, Sao Paulo, Brazil, October 3-6.
  11. Bruns, M., Paredis, C. J. J. and Ferson, S. (2006) "Computational Methods for Decision Making based on Imprecise Information." in Proceedings of the Reliable Engineering Computing Workshop (REC'06), Savannah, GA, February 22-24. [pdf]
  12. Duncan, S., Aughenbaugh, J. M., Paredis, C. J. J. and Bras, B. (2006) "Considering the Info-Gap Approach to Robust Decisions Under Severe Uncertainty in the Context of Environmentally Benign Design." in Proceedings of the IDETC/CIE 2006, Philadelphia, PA. Paper No. DETC2006-99486.
  13. Duncan, S., Bras, B. and Paredis, C. J. J. (2006) "An Approach to Robust Decision Making under Severe Uncertainty in Life-Cycle Design." in Proceedings of the 13th CIRP International Conference on Life Cycle Engineering, Leuven, Belgium. [pdf]
  14. Duncan, S., Paredis, C. J. J. and Bras, B. (2006) "Applying Information Gap Decision Making to a Design Problem having Severe Uncertainty." in Proceedings of the The Reliability and Robust Design in Automotive Engineering Forum of the SAE 2006 World Congress. Paper No. 2006-01-0273. [pdf]
  15. Johnston, S. R., Reed, M., Wang, H. and Rosen, D. W. (2006) "Analysis of Mesostructure Unit Cells Comprised of Octet-truss Structures." in Proceedings of the The Seventeenth Solid Freeform Fabrication Symposium Austin, TX, August 14-16, 2006. [pdf]
  16. Ling, J. M., Aughenbaugh, J. M. and Paredis, C. J. J. (2006) Managing the Collection of Information under Uncertainty using Information Economics. ASME Journal of Mechanical Design, 128(4), 980-990.[pdf]
  17. Muchnick, H., Thompson, S. C., Samadiani, E., Allen, J. K., Joshi, Y. and Mistree, F. (2006) "Exploring the Advantages of Materials Design in a Product Design Process." in Proceedings of the IDETC/CIE 2006, Philadelphia, PA. Paper No. DETC2006-99492. [pdf]
  18. Paredis, C. J. J. and Bras, B. (2006) "Managing Uncertainty in Environmentally Benign Design and Manufacture." NSF Proposal, NSF Grant # 0522116. [pdf]
  19. Reap, J., Roman, F., Guldberg, T. and Bras, B. (2006) "Integrated Ecosystem Landscape and Industrial Modeling for Strategic Environmentally Conscious Process Technology Selection." in Proceedings of the 13th CIRP International Conference on Life Cycle Engineering, Leuven, Belgium, May 31 - June 2. Paper No. 73. [pdf]
  20. Rekuc, S. J., Aughenbaugh, J. M., Bruns, M. and Paredis, C. J. J. (2006) "Eliminating Design Alternatives based on Imprecise Information." in Proceedings of the SAE 2006 World Congress. Paper No. 2006-01-0272. [pdf]
  21. Rosen, D. W., Johnston, S. R., Reed, M. and Wang, H. (2006) "Design of General Lattice Structures for Lightweight and Compliance Applications." in Proceedings of the NSF Design, Service, and Manufacturing Grantees and Research Conference, St. Louis, MO, July 25-27.
  22. Rosen, D. W., Johnston, S. R., Reed, M. and Wang, H. (2006) "Design of general lattice structures for lightweight and compliance applications." in Proceedings of the Rapid Manufacturing Conference, Loughborough, UK, July 5-6, 2006. [pdf]
  23. Schaefer, D. (2006) Electrical Engineering CAD: A New Generation of ECAD/ECAE Systems. Journal of The Institution of Engineering Designers, 32(5), 12-16
  24. Schaefer, D. (2006) A generic approach to automated product variant design technology. Journal of The Institution of Engineering Designers, 32(1), 30-33
  25. Schaefer, D. (2006) A Generic Approach to Variant Design in Electrical Engineering CAD. ATP International - Automation Technology in Practice, 4(2), 46-50
  26. Thompson, S. C., Muchnick, H., Choi, H.-J., McDowell, D., Allen, J. K. and Mistree, F. (2006) "Robust Materials Design of Blast Resistant Panels." in Proceedings of the AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA. Paper No. AIAA 2006-7005. [pdf]
  27. Wang, H., Johnston, S. R. and Rosen, D. W. (2006) "Design of a graded cellular structure for an acetabular hip replacement component." in Proceedings of the The Seventeenth Solid Freeform Fabrication Symposium Austin, TX, August 14-16, 2006. [pdf]
  28. Wang, H. and Rosen, D. W. (2006) "An Automated Design Synthesis Method for Compliant Mechanisms with Application to Morphing Wings." in Proceedings of the ASME Design Mechanisms and Robotics Conference, Philadelphia, PA, September 10-13, 2006. Paper No. DETC2006-99661. [pdf]
  29. Wang, H., Williams, C. and Rosen, D. W. (2006) "Design Synthesis of Adaptive Mesoscopic Cellular Structures with Unit Truss Approach and Particle Swarm Optimization Algorithm." in Proceedings of the The Seventeenth Solid Freeform Fabrication Symposium Austin, TX, August 14-16, 2006. [pdf]
  30. Williams, C. B. and Mistree, F. (2006) Empowering Students to Learn How to Learn: Mass Customization of a Graduate Engineering Design Course. The International Journal of Engineering Education, 22(6), 1269-1280.[pdf]
  31. Allen, J. K., Bras, B., Mistre, F., Paredis, C. J. J. and Rosen, D. (2005) "Georgia Institute of Technology: The Systems Realization Laboratory." In J. P. Clarkson and C. Eckert Eds.) Design Process Improvement: A Review of Current Practice. Springer-Verlag:London.
  32. Aughenbaugh, J. M., Ling, J. M. and Paredis, C. J. J. (2005) "The Use of Imprecise Probabilities to Estimate the Value of Information in Design." in Proceedings of the 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, 5-11 November 2005. Paper No. IMECE2005-81181. [pdf]
  33. Aughenbaugh, J. M. and Paredis, C. J. J. (2005) "The Value of Imprecise Probabilities in Engineering Design." in Proceedings of the 2005 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Long Beach, CA, 24-28 September 2005. Paper No. DETC2005-85354. [pdf]
  34. Bajaj, M., Rathnam, T., Peak, R. S. and Paredis, C. J. J. (2005) "Federated Product Models for Enabling Simulation-Based Product Lifecycle Management." in Proceedings of the 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, 5-11 November 2005. Paper No. IMECE2005-81663.
  35. Chen, Y., Wang, H., Rossignac, J. and Rosen, D. W. (2005) "Filleting And Rounding Using A Point-Based Method." in Proceedings of the ASME Design Automation Conference, Long Beach, California, September 24-28, 2005. Paper No. DETC05/DAC-85408. [pdf]
  36. Iba, S., Paredis, C. J. J. and Khosla, P. K. (2005) Interative Multimodal Robot Programming. International Journal of Robotics Research, 24(1), 83-104.[pdf]
  37. Malak, R. J. (2005) "A Framework for Validating Reusable Behavioral Models in Engineering Design." M.S. Thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA. [pdf]
  38. Panchal, J. H., Fernández, M. G., Allen, J. K., Paredis, C. J. J. and Mistree, F. (2005) "An Interval Based Focalization Method for Decision Making in Decentralized Multifunctional Design." in Proceedings of the ASME 2005, Design Engineering Technical Conferences and Computer and Information in Engineering Conference, Long Beach, CA. Paper No. DETC2005-85322. [pdf]
  39. Panchal, J. H., Fernández, M. G., Allen, J. K., Paredis, C. J. J. and Mistree, F. (2005) "Facilitating Meta-design via Separation of Problem, Product and Process Information." in Proceedings of the 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, 5-11 November 2005. Paper No. IMECE2005-80013. [pdf]
  40. 36 (temp placeholder)
  41. Reap, J., Baumeister, D. and Bras, B. (2005) "Holism, Biomimicry and Sustainable Engineering." in Proceedings of the International Mechancial Engineering Conference and Exposition, Orlando, FL, USA, November 5-11. Paper No. 81343, 423-431.
  42. Wang, H. (2005) "A unit cell approach for lightweight structure and compliant mechanism." PhD Dissertation Thesis, School of Mechanical Engineering, Georgia Institute Of Technology, Atlanta, GA.
  43. Wang, H., Chen, Y. and Rosen, D. W. (2005) "A Hybrid Geometric Modeling Method For Large Scale Conformal Cellular Structures." in Proceedings of the ASME Computers and Information in Engineering Conference, Long Beach, California, September 24-28, 2005. Paper No. DETC2005-85366. [pdf]
  44. Williams, C. B., Allen, J. K., Rosen, D. W. and Mistree, F. (2005) "Process Parameter Platform Design to Manage Workstation Capacity." In T. Simpson, Z. Siddique and J. Jiao Eds.) Product Platform and Product Family Design: Methods and Applications. Springer:New York. [pdf]
  45. Williams, C. B., Mistree, F. M. and Rosen, D. W. (2005) "Investigation of Solid Freeform Fabrication Processes for the Manufacture of Parts with Designed Mesostructure." in Proceedings of the 10th ASME Design for Manufacturing and the Life Cycle Conference, Long Beach, California. Paper No. DETC2005/DFMLC-84832. [pdf]
  46. Williams, C. B., Mistree, F. M. and Rosen, D. W. (2005) "Towards the Design of a Layer-Based Additive Manufacturing Process for the Realization of Metal Parts of Designed Mesostructure." in Proceedings of the 16th Solid Freeform Fabrication Symposium, Austin, TX. [pdf]
  47. Aughenbaugh, J. M. and Paredis, C. J. J. (2004) "The Role and Limitations of Modeling and Simulation in Systems Design." in Proceedings of the 2004 ASME International Mechanical Engineering Congress and RD&D Expo, Anaheim, CA, November 13-19, 2004. Paper No. IMECE2004-5981. [pdf]
  48. Baguley, P. and Schaefer, D. (2004) "Costing Issues Regarding Product Variant Design." in Proceedings of the 1st International Conference on Electrical/Electromechanical Computer-Aided Design & Engineering, Durham, UK, November 15-16, 2004. 41-45.
  49. Iba, S., Paredis, C. J. J. and Khosla, P. K. (2004) "Interactive Multi-modal Robot Programming." in Proceedings of the 9th International Symposium of Experimental Robotics, Singapore, 18-21 June.
  50. Liang, V.-C. and Paredis, C. J. J. (2004) A Port Ontology for Conceptual Design of Systems. Journal of Computing and Information Science in Engineering, 4(3), 206-217.[pdf]
  51. Malak, R. J. and Paredis, C. J. J. (2004) "On Characterizing and Assessing the Validity of Behavioral Models and Their Predictions." in Proceedings of the ASME 2004 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Salt Lake City, UT, 28 September - 2 October 2004. Paper No. DETC2004-57452. [pdf]
  52. Malak, R. J. and Paredis, C. J. J. (2004) "Foundations of Validating Reusable Behavioral Models in Engineering Design Problems." in Proceedings of the Winter Simulation Conference, Washington, DC, 5-8 December. [pdf]
  53. 57 (temp placeholder)
  54. Mocko, G., Malak, R. J., Paredis, C. J. J. and Peak, R. S. (2004) "A Knowledge Repository for Behavioral Models in Engineering Design." in Proceedings of the ASME Design Engineering Technical Conferences, Computers and Information in Engineering Conference, Salt Lake City, UT, September 28 - October 2. Paper No. DETC2004-57746. [pdf]
  55. Page, T., Baguley, P. and Schaefer, D. (2004) "Maintaining Electromagnetic Compatibility (EMC) Through Design for Fabrication And Assembly of Pronted Circuit Boards (PCBs)." in Proceedings of the 1st International Conference on Electrical/Electromechanical Computer-Aided Design & Engineering, Durham, UK, November 15-16, 2004. 101-105.
  56. Page, T., Baguley, P. and Schaefer, D. (2004) "Ensuring Electromagnetic Compliance in Printed Circuit Boards Through Design for Assembly Guidelines." in Proceedings of the 1st International Conference on Electrical/Electromechanical Computer-Aided Design & Engineering, Durham, UK, November 15-16, 2004. 106-110.
  57. Panchal, J. H., Fernández, M. G., Paredis, C. J. J., Allen, J. K. and Mistree, F. (2004) "Designing Design Processes in Product Lifecycle Management: Research Issues and Strategies." in Proceedings of the ASME 2004 Design Engineering Technical Conferences and Computer and Information in Engineering Conference, Salt Lake City, UT, September 28-October 2. Paper No. DETC2004/CIE-57742. [pdf]
  58. Panchal, J. H., Fernández, M. G., Paredis, C. J. J. and Mistree, F. (2004) "Reusable Design Processes via Modular, Executable, Decision-Centric Templates." in Proceedings of the 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY. Paper No. AIAA-2004-4601. [pdf]
  59. Rathnam, T. and Paredis, C. J. J. (2004) "Developing Federation Object Models using Ontologies." in Proceedings of the Winter Simulation Conference, Washington, DC, 5-8 December. [pdf]
  60. Reap, J. J., Bras, B., Realff, M. J. and Carmichael, C. (2004) "Using Ecosystem Landsape Models to Investigate Industrial Environmental Impacts." in Proceedings of the Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Salt Lake City, Utah USA, Sept. 28 - Oct. 2. Paper No. 57780, 965-970
  61. Reap, J. J., Bras, B., Realff, M. J. and Carmichael, C. (2004) "Using Ecosystem Landsape Models to Investigate Industrial Environmental Impacts." in Proceedings of the Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Salt Lake City, Utah USA, Sept. 28 - Oct. 2. Paper No. 57780, 965-970
  62. Schaefer, D. (2004) "A New Method for Variant Design Technology in ECAD." in Proceedings of the 1st International Conference on Electrical/Electromechanical Computer-Aided Design & Engineering, Durham, UK, November 15-16, 2004. 46-49.
  63. Williams, C. B., Allen, J. K., Rosen, D. W. and Mistree, F. (2004) "Designing Platforms for Customizable Products in Markets with Non-Uniform Demand." in Proceedings of the 16th ASME Design Theory and Methodology Conference, Salt Lake City, UT. Paper No. DETC2004/DTM-57469. [pdf]
  64. Carlier, T., Stevels, A. L. N., Duncan, S., Bras, B. and Boks, C. B. (2003) "Environmental benchmarking of medium-sized TVs sold in North America, Europe and Asia (China)." in Proceedings of the Proceedings of the 2003 IEEE international symposium on electronics and the environment. pp. 358-364.
  65. Carone, M. J., Williams, C. B., Allen, J. K. and Mistree, F. (2003) "An Application of Constructal Theory in the Multi-Objective Design of Product Platforms." in Proceedings of the 15th ASME Design Theory and Methodology Conference, Chicago, Ill. Paper No. DETC2003/DTM-48667. [pdf]
  66. Iba, S., Paredis, C. J. J. and Khosla, P. K. (2003) "Intention Aware Interactive Multi-Modal Robot Programming." in Proceedings of the 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems, Las Vegas, NV, 27-31 October 2003. [pdf]
  67. Liang, V.-C. and Paredis, C. J. J. (2003) "A Port Ontology for Automated Model Composition." in Proceedings of the Winter Simulation Conference. [pdf]
  68. Rathnam, T., Collins, M. and Paredis, C. J. J. (2003) "Configuration-based Exploratory Design." in Proceedings of the ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, IL, September 2-6, 2003. Paper No. DETC2003/CIE-48199. [pdf]
  69. Reap, J. J., Newcomb, P. J., Carmichael, C. and Bras, B. (2003) "Improving Life Cycle Assessment by Including Spatial, Dynamic and Place-Based Modeling." in Proceedings of the Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, Illinois, USA, Sept. 2-6. Paper No. 48140, 77-83.
  70. Reap, J. J., Newcomb, P. J., Carmichael, C. and Bras, B. (2003) "Improving Life Cycle Assessment by Including Spatial, Dynamic and Place-Based Modeling." in Proceedings of the Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, Illinois, USA, Sept. 2-6. Paper No. 48140, 77-83.
  71. 74 (temp placeholder)
  72. Rosen, D. W., Nguyen, A. and Wang, H. (2003) "On the geometry of low degree-of-freedom digital clay human-computer interface devices." in Proceedings of the ASME Computers and Information in Engineering Conference, Chicago, IL, September 2-6. Paper No. DETC2003/CIE-48295. [pdf]
  73. Schaefer, D. (2003) "Variantentechnologie unter besonderer Berücksichtigung von Elektrotechnik CAD." Ph.D. Thesis, Fakultät Informatik, Elektrotechnik und Informationstechnologie, Institut für Rechnergestützte Ingenieursysteme (IRIS), Universität Stuttgart, Stuttgart, Germany.
  74. Schaefer, D. (2003) "Grundlagen der ECAD-Variantentechnologie." in Proceedings of the Workshop über Elektrotechnik CAD, Stuttgart, Germany, October 9-10, 2003. 1-30.
  75. Schaefer, D. (2003) "Technologieansatz für ein ECAD-Variantenmodul." in Proceedings of the Workshop über Elektrotechnik CAD, Stuttgart, Germany, October 9-10, 2003. 31-62.
  76. Schaefer, D. (2003) Variantentechnologie unter besonderer Berücksichtigung von Elektrotechnik-CAD. Shaker-Verlag:Aachen, Germany.
  77. 67 (temp placeholder)
  78. Schaefer, D. and Roller, D. (2003) Electrical Engineering Solutions - ECAE Systeme der dritten Generation. Automatisierungstechnische Praxis, 45(3), 40-44
  79. Subrahmanian, E., Westerberg, A., Talukdar, S. N., Garret, J., Jacobson, A., Paredis, C. J. J., Amon, C., Herder, P. and Turk, A. (2003) Integrating Social Aspects and Group Work Aspects in Engineering Design Education. International Journal of Engineering Education, 19(1)
  80. Williams, C. B. (2003) "Platform Design for Customizable Products and Processes with Non-Uniform Demand." M.S. Thesis Thesis, G. W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA. [pdf]
  81. Williams, C. B., Panchal, J. H. and Rosen, D. W. (2003) "A General Decision-Making Method for the Rapid Manufacturing of Customized Parts." in Proceedings of the 23rd ASME Computer and Information in Engineering Conference, Chicago, Ill. Paper No. DETC2003/CIE-48198. [pdf]
  82. Allen, J. K., Mistree, F. and Seepersad, C. C. (2002) "Robust Concept Exploration Methods in Materials Design." in Proceedings of the 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA.
  83. Fernández, M. G. (2002) "On Decision Support for Distributed Collaborative Design and Manufacture." M.S. Thesis Thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  84. Fernández, M. G., Rosen, D. W., Allen, J. K. and Mistree, F. (2002) "On a Decision Support Framework for Distributed Collaborative Design and Manufacture." in Proceedings of the 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA.
  85. Fernández, M. G., Rosen, D. W., Allen, J. K. and Mistree, F. (2002) "Digital Interfaces: The Key to Effective Decision-Making in Distributed Collaborative Design and Manufacture." in Proceedings of the ASME Design Engineering Technical Conferences, Montreal, Canada.
  86. Grabowski, R., Navarro-Serment, L. E., Paredis, C. J. J. and Khosla, P. K. (2002) "Heterogeneous Teams of Modular Robots for Mapping and Exploration." In T. Balch and L. E. Parker Eds.) Robot Teams: From Diversity to Polymorphism. A.K. Peters, Ltd.:Boston, MA.
  87. Han, L. and Paredis, C. J. J. (2002) "Artifact Meta-Models for Composable Simulation." in Proceedings of the 2002 Advanced Simulation Technologies Conference, San Diego, CA, April 14-18. [pdf]
  88. Hernández, G., Seepersad, C. C., Allen, J. and Mistree, F. (2002) A Method for Interactive Decision-Making in Collaborative, Distributed Engineering Design. International Journal of Agile Manufacturing Systems, In Press(
  89. Hernandez, G., Seepersad, C. C. and Mistree, F. (2002) Designing for Maintenance: A Game Theoretic Approach. Engineering Optimization, 34(6), 561-577
  90. Iba, S., Paredis, C. J. J. and Khosla, P. K. (2002) "Interactive Multi-Modal Robot Programming." in Proceedings of the 2002 IEEE International Conference on Robotics and Automation, Washington, DC. 161-168. [pdf]
  91. Latimer, D. T., Gujar, S., Garrett, J., Akinci, B., Thayer, S. and Paredis, C. J. J. (2002) "Running Surface Assessment Technology Review." Tech Report, CMU-ICES-TR-04-03-02.
  92. Mistree, F., Seepersad, C. C., Dempsey, B. M., McDowell, D. L. and Allen, J. K. (2002) "Robust Concept Exploration Methods in Materials Design." in Proceedings of the 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA.
  93. Navarro-Serment, L. E., Grabowski, R., Paredis, C. J. J. and Khosla, P. K. (2002) Millibots: The Development of a Framework and Algorithms for a Distributed Heterogeneous Robot Team. IEEE Robotics and Automation Magazine, 9(4), 31-40.[pdf]
  94. Panchal, J., Chamberlain, M. K., Rosen, D. W., Allen, J. K. and Mistree, F. (2002) "A Service Based Architecture for Information and Asset Utilization in Distributed Product Realization." in Proceedings of the accepted by the 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA, September 4-6.
  95. Reap, J. J. and Bras, B. (2002) "Design for Disassembly and the Value of Semi-Destructive Robotic Disassembly." in Proceedings of the Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Montreal, Quebec, Canada, Sept. 29 - Oct. 2. Paper No. 34181, 275-281.
  96. Reap, J. J. and Bras, B. (2002) "Design for Disassembly and the Value of Semi-Destructive Robotic Disassembly." in Proceedings of the Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Montreal, Quebec, Canada, Sept. 29 - Oct. 2. Paper No. 34181, 275-281.
  97. Roller, D., Eck, O., Rieg, B. and Schaefer, D. (2002) "Representation and Conversion of Dimension Units in CAD Data Models." In U. Cugini and M. Wozny Eds.) From Knowledge Intensive CAD to Knowledge Intensive Engineering. Kluwer Academic Publishers:
  98. 93 (temp placeholder)
  99. Schaefer, D., Roller, D. and Böck, D. (2002) "CAE Systeme der dritten Generation - Wahrheit oder Vision?" in Proceedings of the Workshop über Elektrotechnik CAD, Stuttgart, Germany, July 18, 2001. 1-21.
  100. Schaefer, D., Roller, D., Plessow, M. and Wrobel, G. (2002) Aktuelle Forschungs- und Entwicklungstrends im ECAD-Umfeld (Teil 1). CAD-CAM REPORT, 21(3), 88-91
  101. Schaefer, D., Roller, D., Plessow, M. and Wrobel, G. (2002) Schaltschrank-Engineering: Forschungs- und Entwicklungsaktivitäten (Teil 2). CAD-CAM REPORT, 21(4), 44-46
  102. Seepersad, C. C., Cowan, F. S., Chamberlain, M. K. and Mistree, F. (2002) "Strategic Design: Leveraging and Innovation for a Changing Marketplace." in Proceedings of the Engineering Design Conference, King's College, London. 3-20.
  103. Seepersad, C. C., Dempsey, B. M., Allen, J. K., Mistree, F. and McDowell, D. L. (2002) "Design of Multifunctional Honeycomb Materials." in Proceedings of the 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA.
  104. Seepersad, C. C., Mistree, F. and Allen, J. K. (2002) "A Quantitative Approach for Designing Multiple Product Platforms for an Evolving Portfolio of Products." in Proceedings of the ASME Design Engineering Technical Conferences, Advances in Design Automation, Montreal, Canada.
  105. Sinha, R., Gupta, S. K., Paredis, C. J. J. and Khosla, P. K. (2002) Extracting Articulation Models from CAD Models of Parts with Curved Surfaces. Journal of Mechanical Design, 124(1), 106-114.[pdf]
  106. Sinha, R., Paredis, C. J. J. and Khosla, P. K. (2002) "Supporting Design Refinement in MEMS Design." in Proceedings of the 2002 ASME Design Engineering Technical Conferences, Computers and Information in Engineering, Montreal, Canada, September 29 - October 2. DETC2002/CIE-34489.
  107. Sinha, R., Paredis, C. J. J. and Khosla, P. K. (2002) "Behavioral Model Composition in Simulation-based Design." in Proceedings of the 35th Annual Simulation Symposium, San Diego, CA, 14-18 April 2002. 308-315. [pdf]
  108. Wang, H. and Rosen, D. W. (2002) "Computer-Aided Design Methods for Additive Fabrication of Truss Structures." in Proceedings of the International Conference on Manufacturing Automation (ICMA 2002), Hong Kong.
  109. Wang, H. and Rosen, D. W. (2002) "Parametric Modeling Method for Truss Structures." in Proceedings of the ASME DETC Computers and Information in Engineering Conference, Montreal, Quebec, Canada. Paper No. DETC02/CIE-34495.
  110. Al-Ajmi, K. (2001) "Object-Oriented Modeling of Train Systems." M.S. Thesis, Department of Electrical and Computer Engineering, Carnegie Mellon University, Pittsburgh.
  111. Allen, D. T., Bauer, D. J., Bras, B., Gutoswki, T. G., Murphy, C. F., Piwonka, T. S., Sheng, P. S., Sutherland, J. W., Thurston, D. L. and Wolff, E. E. (2001) "Environmentally Benign Manufacturing: Trends in Europe, Japan and the USA." in Proceedings of the Proceedings 2001 ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Pittsburgh, PA, September 14-17. Paper no. DETC2001/DFM-21204, 17 pp.
  112. Bailey, R., Bras, B. and Allen, J. (2001) "Measuring Material Cycling in Industrial Systems." in Proceedings of the IEEE Symposium on Electronics and the Environment, Denver, CO. 6.
  113. Bras, B., Duncan, S., Franz, M., Graver, T., Han, Y.-H., McGinnis, L., Velasquez, S., Wilgenbusch, B., Zhou, C. and Gustashaw, D. (2001) "Real-Time Integrated Economic and Environmental Performance Monitoring of a Production Facility." in Proceedings of the 2001 Society of Automotive Engineers World Congress, Detroit. Paper No. Paper No. 2001-01-0625.
  114. Chamberlain, M. K., Williams, C. B., Cowan, F. S. and Mistree, F. (2001) "Orchestrating Learning in a Graduate Engineering Design Course." in Proceedings of the 13th ASME Design Theory and Methodology Conference, Pittsburgh, PA. Paper No. DETC2001/DTM-2037. [pdf]
  115. Chen, Y. (2001) "Computer-Aided Design for Rapid Tooling: Methods for Mold Design and Design for Manufacture." PhD Dissertation Thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  116. Choi, H. (2001) "Generalized Distributed Design & Manufacturing Framework." Master of Science Thesis, Department of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  117. Choi, H. (2001) "A Framework for Distributed Product Realization Environment." MS Thesis Thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  118. Coutee, A. S., McDermott, S. D. and Bras, B. (2001) A Haptic Assembly and Disassembly Simulation Environment and Associated Computational Load Optimization Techniques. ASME Transactions - Journal of Computing & Information Science in Engineering, 1(2), 113-122
  119. Davis, B. E. (2001) "Characterization and Calibration of Stereolithography Products and Processes." Master's Thesis Thesis, Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  120. DeKroon, J. P. and Bras, B. (2001) "Practical Considerations and Lessons Learned in Setting up a Virtual Reality System for Industrial Virtual Prototyping." in Proceedings of the Proceedings 2001 ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Pittsburgh, PA, September 14-17. Paper no. DETC2001/CIE-21258, 10 pp.
  121. Fernández, M. G., Seepersad, C. C., Rosen, D. W., Allen, J. K. and Mistree, F. (2001) "Utility-Based Decision, Support for Selection in Engineering Design." in Proceedings of the 13th Internation Conference on Design Theory and Methodology, Pittsburgh, PA.
  122. Gupta, S. K., Paredis, C. J. J., Sinha, R. and Brown, P. F. (2001) Intelligent Assembly Modeling and Simulation. Assembly Automation, 21(3), 215-235
  123. Gutowski, T., Murphy, C., Allen, D., Bauer, D., Bras, B., Piwonka, T., Sheng, P., Sutherland, J., Thurston, D. and Wolff, E. (2001) WTEC Panel Report on Environmentally Benign Manufacturing. International Technology Research Institute, World Technology (WTEC) Division
  124. Gutowski, T. G., Murphy, C. F., Allen, D. T., Bauer, D. J., Bras, B., Piwonka, T. S., Sheng, P. S., Sutherland, J. W., Thurston, D. L. and Wolff, E. E. (2001) "Environmentally Benign Manufacturing." Panel Report.
  125. Han, L., Paredis, C. J. J. and Khosla, P. K. (2001) "Object-Oriented Libraries of Physical Components in Simulation and Design." in Proceedings of the 2001 Summer Computer Simulation Conference, Orlando, FL, July, 2001. 1--8. [pdf]
  126. Hernandez, G. (2001) "Platform Design for Customizable Products as a Problem of Access in Geometric Space." PhD dissertation Thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  127. Hernandez, G., Allen, J. K. and Mistree, F. (2001) The Compromise Decision Support Problem: Modeling the Deviation Function as in Physical Programming. Engineering Optimization, 33(4), 445-471
  128. Hernandez, G., Simpson, T. W., Allen, J. K., Bascaran, E., Avila, L. F. and Salinas, F. (2001) Robust Design of Product Families with Production Modeling and Evaluation. Journal of Mechanical Design, 123(2), 183-190
  129. Holeczek, A., Schaefer, D. and Roller, D. (2001) "Die Prozesskette des Schaltschrankbaus." in Proceedings of the Workshop über Elektrotechnik CAD, Stuttgart, Germany, July 20, 2001. 37-51.
  130. Kulkarni, R. (2001) "Web-Based System for Distributed Product Realization." Master's thesis Thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  131. Mack, J., Schaefer, D. and Roller, D. (2001) "Werkzeuge für dir rechnergestützte Entwicklung von Schaltanlagen bzw. Schaltschränken." in Proceedings of the Workshop über Elektrotechnik CAD, Stuttgart, Germany, July 20, 2001. 151-163.
  132. Paredis, C. J. J., Diaz-Calderon, A., Sinha, R. and Khosla, P. K. (2001) Composable Models for Simulation-Based Design. Engineering with Computers, 17(2), 112-128.[pdf]
  133. Plessow, M. and Schaefer, D. (2001) Workshop Elektrotechnik CAD: GI-Arbeitskreis E/M-CAD. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 96(10), 520
  134. Roller, D. and Schaefer, D. (2001) Anforderungen an Software für den globalen Engineering Prozess. etz Elektrotechnik und Automation, No. 5/2001(14-18
  135. Sambu, S. P. (2001) "A Design for Manufacture Method for Rapid Prototyping and Rapid Tooling." M.S. Thesis Thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  136. Schaefer, D. and Roller, D. (2001) XML - Grundlagen und Anwendungen für des neuen Internet Standards. CAD-CAM REPORT, 20(2), 28-33
  137. 126 (temp placeholder)
  138. Schaefer, D. and Roller, D. (2001) "E-Learning, Mind Mapping, High Soeed Reading - Lernen im dritten Jahrtausend." in Proceedings of the Software-Entwicklung für Internet und Intranet, Ostfildern, Germany, September 17-19, 2001. 139-150.
  139. Schaefer, D., Roller, D. and Plessow, M. (2001) Schaltschrank-Engineering als durchgaengiger Prozess. CAD-CAM REPORT, 20(4), 66-69
  140. Seepersad, C. C. (2001) "A Utility-Based Compromise Decision Support Problem with Applications in Product Platform Design." M.S. Thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  141. Siddique, Z. and Rosen, D. W. (2001) On Combinatorial Design Spaces for the Configuration Design of Product Families. Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, 15(2), 91-108
  142. Simpson, T. W., Maier, J. R. A. and Mistree, F. (2001) Product Platform Design: Method and Application. Research in Engineering Design, 13(1), 2-22
  143. Simpson, T. W., Seepersad, C. C. and Mistree, F. (2001) Balancing Commonality and Performance within the Concurrent Design of Multiple Products in a Product Family. Concurrent Engineering: Research and Applications (CERA), 9(3), 177-190
  144. Sinha, R. (2001) "Compositional Design and Simulation of Egnineered Systems." Ph.D. Thesis, Institute for Complex Engineered Systems, Carnegie Mellon University, Pittsburgh, PA.
  145. Sinha, R., Liang, V.-C., Paredis, C. J. J. and Khosla, P. K. (2001) Modeling and Simulation Methods for Design of Engineering Systems. Journal of Computing and Information Science in Engineering, 1(1), 84-91.[pdf]
  146. Sinha, R., Paredis, C. J. J. and Khosla, P. K. (2001) "Kinematics Support for Design and Simulation of Mechatronic Systems." In U. Cugini and M. Wozny Eds.) From Knowledge Intensive CAD to Knowledge Intensive Engineering. Academic Publishers:Boston, MA.
  147. Sinha, R., Paredis, C. J. J. and Khosla, P. K. (2001) "Modeling of Component Interactions in Configuration Design." Technical Report.
  148. Sinha, R., Paredis, C. J. J. and Khosla, P. K. (2001) "Interaction Modeling in Systems Design." in Proceedings of the 2001 ASME Design Engineering Technical conferences, Pittsburgh, PA. Paper No. DETC2001/CIE-21285. [pdf]
  149. Subrahmanian, E., Westerberg, A., Talukdar, S. N., Garrett, J., Jacobson, A., Paredis, C. J. J., Amon, C., Herder, P. and Turk, A. (2001) "Integrating Social Aspects and Group Work Aspects in Engineering Design Education." in Proceedings of the Social Dimensions of Engineering Design, Mudd Design Workshop III, Claremont, CA, 17-19 May.
  150. Tinós, R., Navarro-Serment, L. E. and Paredis, C. J. J. (2001) "Fault Tolerant Localization for Teams of Distributed Robots." in Proceedings of the 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems, Maui, HI, 29 Oct-3 Nov. 1061-1066. [pdf]
  151. Wang, H. (2001) "Computer-Aided Design Methods For The Additive Fabrication Of Truss Structure." Master Thesis Thesis, Departmnet of Mechanical Engineering, Georgia Institute Of Technology, Atlanta.
  152. West, A. P., Sambu, S. P. and Rosen, D. W. (2001) A Process Planning Method for Improving Build Performance in Stereolithography. Computer-Aided Design, 33(1), 65-80
  153. Xiao, A., Choi, H.-J., Kulkarni, R., Allen, J. K., Rosen, D. W., Mistree, F. and Feng, S. (2001) "A Web-Based Distributed Product Realization Environment." in Proceedings of the ASME Computers and Information in Engineering Conference, Pittsburgh, PA.
  154. Bailey, R., Bras, B. and Allen, J. (2000) "Input-Output Modeling of Material Flows in Industry." PhD Thesis, Mechanical Engineering, Georgia Institute of Technology, Atlanta.
  155. Bererton, C., Navarro-Serment, L. E., Grabowski, R., Paredis, C. J. J. and Khosla, P. K. (2000) "Millibots: Small Distributed Robots for Surveillance and Mapping." in Proceedings of the Government Microcircuits Applications Conference (GOMAC 2000), Orlando, FL.
  156. Bras, B., McGinnis, L. and Zhou, C. (2000) Integrated Environmental and Economic Performance Monitoring. George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA
  157. Cowan, F. S., Marston, M. and Mistree, F. (2000) "Design for Excellence: A Microworld, Game-Theoretic Approach." in Proceedings of the Engineering Design Conference 2000: Design for Excellence, Brunel University, UK. 3-24.
  158. Diaz-Calderon, A., Paredis, C. J. J. and Khosla, P. K. (2000) Automatic Generation of System-Level Dynamic Equations for Mechatronic Systems. Computer-Aided Design, 32(5-6), 339-354.[pdf]
  159. Diaz-Calderon, A., Paredis, C. J. J. and Khosla, P. K. (2000) "Reconfigurable Models: A Modeling Paradigm to Support Simulation-Based Design." in Proceedings of the 2000 Summer Computer Simulation Conference, Vancouver, Canada, July 16-20. [pdf]
  160. Diaz-Calderon, A., Paredis, C. J. J. and Khosla, P. K. (2000) "Organization and Selection of Reconfigurable Models." in Proceedings of the 2000 Winter Simulation Conference, Orlando, FL, 10-13 Dec., 386-393. [pdf]
  161. Diez, J., Kataria, A, Wang, H, Ebert-Uphoff, I, Rosen, D (2000) "RAPITRONICS - On the Potential of Rapid Prototyping Technology to Fabricate Mechatronic Systems." in Proceedings of the IEEE/ASME Transactions on Mechatronics.
  162. Ebert-Uphoff, I., Rosen D. (2000) "Design and Fabrication of Low Inertia, High Performance Robotic Manipulators."
  163. Emblemsvag, J. and Bras, B. (2000) Activity Based Costing and Environmental Management: A different approach to ISO14000 Compliance. Kluwer Academic Publishers:Norwell, Massachusetts.
  164. Emblemsvåg, J. and Bras, B. A. (2000) Activity-Based Cost and Environmental Management - A Different Approach to the ISO 14000 Compliance. Kluwer Academic Publishers:Boston/Dordrecht/London.
  165. Ferreira, E. D., Tsai, S.-J., Paredis, C. J. J. and Brown, H. B. (2000) Control of the Gyrover: a single-wheel gyroscopically stabilized robot. Advanced Robotics, 14(6), 459-475.[pdf]
  166. Franck, C. G. and Rosen, D. W. (2000) "Measuring Value of Prototypes During Product Development." in Proceedings of the ASME Design for Manufacturing Conference, Baltimore, MD.
  167. Gerhard, J. F., Allen, J. K., Rosen, D. W. and Mistree, F. (2000) "A Distributed Product Realization Environment for Design and Manufacturing." in Proceedings of the ASME Computers and Information in Engineering Conference, Baltimore, MD.
  168. Gerhard, J. F., Rosen, D., Allen, J. K. and Mistree, F. (2000) "A Distributed Product Realization Environment for Design and Manufacturing." in Proceedings of the Computers and Information in Engineering Conference, Baltimore, MD.
  169. Grabowski, R., Navarro-Serment, L. E., Paredis, C. J. J. and Khosla, P. K. (2000) Heterogeneous Teams of Modular Robots for Mapping and Exploration. Autonomous Robots, 8(3), 293-308.[pdf]
  170. Hernandez, G., Conner Seepersad, C. and Mistree, F. (2000) "Commonalizing Subsystem Components to Facilitate Maintenance: A Game Theoretic Approach." in Proceedings of the AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA.
  171. Hernandez, G. and Mistree, F. (2000) Integrating Product Design and Manufacturing: A Game Theoretic Approach. Engineering Optimization, 32(6), 749-775
  172. Kataria, A. and Rosen, D. W. (2000) "Building Around Inserts: Methods for Fabricating Complex Devices in Stereolithography." in Proceedings of the ASME DETC, Baltimore, MD.
  173. Lynn-Charney, C. and Rosen, D. W. (2000) Usage of accuracy models in stereolithography process planning. Rapid Prototyping Journal, 6(2), 77-86
  174. Marston, M. (2000) "Game Based Design: A Game Theory Based Approach to Engineering Design." Ph.D. Thesis, G. W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  175. Marston, M., Allen, J. K. and Mistree, F. (2000) The Decision Support Problem Technique: Integrating Descriptive and Normative Approaches. Engineering Valuation & Cost Analysis, Special Issue on Decision-Based Design: Status and Promise, 3(pp. 107-129
  176. Marston, M. and Mistree, F. (2000) "Game-Based Design: A Game Theoretic Extension to Decision-Based Design." in Proceedings of the ASME Design Theory and Methodology Conference, Baltimore, MD.
  177. Paredis, C. J. J., Diaz-Calderon, A., Sinha, R. and Khosla, P. K. (2000) "Composable Models for Simulation-Based Design." Technical Report, ICES-04-21-00. [pdf]
  178. Pederson, K., Emblemsvag, J., Allen, J. K. and Mistree, F. (2000) "Validating Design Methods and Research - The Validation Square." in Proceedings of the ASME Design Theory and Methodology Conference, DETC00/DTM-14579, Baltimore, MA.
  179. Roller, D., Eck, O., Rieg, B. and Schaefer, D. (2000) "Knowledge-Based Representation of Dimension Units in CAD Data Models." in Proceedings of the The Fourth IFIP Working Group 5.2 Workshop on Knowledge Intensive CAD: KIC-4, Parma, Italy, May 22-24, 2000. 103-112.
  180. Roller, D. and Schaefer, D. (2000) "Anforderungen an Software für den internationalen globalen Engineering Prozess." in Proceedings of the IT & Automation 2000, Nuremburg, November 28-30, 2000. 221-230.
  181. Roller, D. and Schaefer, D. (2000) "Variant Design in Electrical Engineering - An Extension of Parametric Modeling." In P. Brunet, C. Hoffmann and D. Roller Eds.) CAD Tools and Algorithms for Product Design. Springer:Berlin.
  182. Rosen, D. W. (2000) "Design-to-Manufacture Information Transfer in the Context of Solid Freeform Fabrication Technologies." In Ed., S. Finger, T. Tomiyama and M. Mantyla Eds.) Knowledge Intensive Computer Aided Design. Kluwer Academic Publishers:Boston.
  183. Rosen, D. W., Chen, Y., Gerhard, J., Allen, J. K. and Mistree, F. (2000) "Design Decision Templates and Their Implementation for Distributed Design and Fabrication." in Proceedings of the ASME Advances in Design Automation, Baltimore, MD.
  184. Salido-Tercero, J., Paredis, C. J. J. and Khosla, P. K. (2000) "Continuous Probabilistic Mapping by Autonomous Robots." In P. Corke and J. Trevelyan Eds.) Experimental Robotics VI. (Lecture Notes in Control and Information Sciences Vol.250 ). Springer-Verlag:Sydney, NSW, Australia.
  185. Schaefer, D. and Roller, D. (2000) "Advanced CAD/CAM Technologies Assessed From a User's Point of View." in Proceedings of the 33rd International Symposium on Automotive Technology and Automation: ISATA 2000, Dublin, Ireland. 45-59.
  186. Seepersad, C. C., Hernandez, G. and Allen, J. K. (2000) "A Quantitative Approach to Determining Product Platform Extent." in Proceedings of the ASME Advances in Design Automation Conference, Baltimore, MD.
  187. Siddique, Z. and Rosen, D. W. (2000) "Product Family Configuration Reasoning Using Discrete Design Spaces." in Proceedings of the ASME Design Theory and Methodology Conference, Baltimore, MD.
  188. Sinha, R., Paredis, C. J. J. and Khosla, P. K. (2000) "Kinematics Support for Design and Simulation of Mechatronic Systems." in Proceedings of the The Fourth IFIP Working Group 5.2 Workshop on Knowledge Intensive CAD (KIC-4), Parma, Italy, May, 22-24. 246-258. [pdf]
  189. Sinha, R., Paredis, C. J. J. and Khosla, P. K. (2000) "Integration of Mechanical CAD and Behavioral Modeling." in Proceedings of the 2000 IEEE/ACM International Workshop on Behavioral Modeling and Simulation, Orlando, FL, 19-20 October. 31-36. [pdf]
  190. Snow, B. (2000) "Prototyping a Robotic Disassembly Test-bed." M.S. Thesis Thesis, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
  191. Wolf, K., Roller, D. and Schaefer, D. (2000) An Approach to Computer-Aided Quality Control Based on 3D Coordinate Metrology. Journal of Materials Processing Technology, 107(1-3), 96-110
  192. Xiao, A., Allen, J. K., Rosen, D. and Mistree, F. (2000) "A Method to Design Product Architecture in a Distributed Product Realization Environment." in Proceedings of the 9th International Workshop on Enabling Technologies: Infrastructure for Collaborative Enterprises, Gaithersburg, MD.
  193. Conner, Dekroon and Mistree (1999) "A product variety tradeoff evaluation method for a family of cordless drill transmissions." in Proceedings of the ASME Design Engineering Technical Conference, Las Vegas, NV, September 12-15.
  194. Conner (Seepersad), C. G., DeKroon, J. P. and Mistree, F. (1999) "A Product Variety Tradeoff Evaluation Method for a Family of Cordless Drill Transmissions." in Proceedings of the ASME Advances in Design Automation Conference, Las Vegas, NV.
  195. Dettlaff, B., Roller, D. and Schaefer, D. (1999) "A System Architecture for Modules Supporting Variational Design in Electrical Engineering." in Proceedings of the 32nd International Symposium on Automotive Technology and Automation: ISATA '99, Vienna, Austria, June 14-18, 1999. 53-61.
  196. Diaz-Calderon, A., Paredis, C. J. J. and Khosla, P. K. (1999) "On the synthesis of the system graph for 3D mechanics." in Proceedings of the Proceedings of the 1999 American Control Conference, San Diego, CA, June 2-4. 3137-3141. [pdf]
  197. Diaz-Calderon, A., Paredis, C. J. J. and Khosla, P. K. (1999) "A Composable Simulation Environment for Mechatronic Systems." in Proceedings of the SCS 1999 European Simulation Symposium, Erlangen, Germany, October 26-28. 142-148. [pdf]
  198. Diaz-Calderon, A., Paredis, C. J. J. and Khosla, P. K. (1999) "Combining information technology components and symbolic equation manipulation in modeling and simulation of mechatronic systems." in Proceedings of the IEEE International Symposium on Computer Aided Control System Design, Island of Hawaii, HI, August 22-27. 144-150. [pdf]
  199. Dixon, K. R., Dolan, J., Huang, W., Paredis, C. J. J. and Khosla, P. K. (1999) "RAVE: A Real and Virtual Environment for Multiple Mobile Robot Systems." in Proceedings of the 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'99), Kyongju, Korea, October 17-21. 1360-1367. [pdf]
  200. Emblemsvåg, J. (1999) "Activity-Based Life-Cycle Assessments in Design and Management." Ph.D. Dissertation Thesis, School of Mechanical Engineering, Georgia Institute of Technology, Atlanta.
  201. Emblemsvåg, J. and Bras, B. (1999) LCA Comparability and the Waste Index. International Journal of Life Cycle Assessment, 4(5), 282-290
  202. Fraile, J.-C., Paredis, C. J. J., Wang, C.-H. and Khosla, P. K. (1999) "Agent-Based Planning and Control of a Multi-Manipulator Assembly System." in Proceedings of the 1999 IEEE International Conference on Robotics and Automation, Detroit, MI, May 10-15. 1219-1225. [pdf]
  203. Gerhard, J. F., Duncan, S. J., Chen, Y., Allen, J. K., Rosen, D., Mistree, F. and Dugenske, A. D. (1999) "Towards a decision-based distributed product realization environment for engineering systems." in Proceedings of the ASME Design Engineering Technical Conferece, Las Vegas, NV. DETC99/CIE-9085.
  204. Gerhard, J. F., Duncan, S. J., Chen, Y., Allen, J. K., Rosen, D. W. and Mistree, F. (1999) "Towards a Decision-Based, Distributed Product Realization Environment for Engineering Systems." in Proceedings of the ASME Computers in Engineering Conference, DETC/CIE-9085, Las Vegas, NV, September 13-15.
  205. Herrmann, A. and Allen, J. (1999) "Selection of Rapid Tooling Materials and Processes in a Distributed Design Environment." in Proceedings of the ASME Design for Manufacturing Conference, Las Vegas, NV.
  206. Iba, S., Vande Weghe, J. M., Paredis, C. J. J. and Khosla, P. K. (1999) "An Architecture for Gesture-Based Control of Mobile Robots." in Proceedings of the 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'99), Kyongju, Korea, October 17-21. 851-857. [pdf]
  207. McDermott, S. (1999) "Development of a Haptically Enabled Disassembly Simulation Environment." M.S. Thesis Thesis, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
  208. McDermott, S. and Bras, B. A. (1999) "Development of a Haptically Enabled Dis/Reassembly Environment." in Proceedings of the Proceedings 1999 ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Las Vegas, NV, September 12-15. Paper no. 99DETC/CIE-9035, 11 pp.
  209. McIntosh, M. and Bras, B. A. (1999) Product, process, and organizational design for remanufacture - an overview of research. Robotics and Computer Integrated Manufacturing - Special Issue on Remanufacturing, 15(167-178
  210. Navarro-Serment, L. E., Grabowski, R. J., Paredis, C. J. J. and Khosla, P. K. (1999) "Modularity in Small Distributed Robots." in Proceedings of the SPIE Conference on Sensor Fusion and Decentralized Control in Robotic Systems II, Boston, MA, September 19-20. 297-306. [pdf]
  211. Navarro-Serment, L. E., Paredis, C. J. J. and Khosla, P. K. (1999) "A Beacon System for the Localization of Distributed Robotic Teams." in Proceedings of the International Conference on Field and Service Robotics, Pittsburgh, PA, 29-31 August 1999. 232-237. [pdf]
  212. Ortega, R. A., Kalyan-Seshu, U.-S. and Bras, B. A. (1999) "A Decision Support Model for the Life-Cycle Design of a Family of Oil Filters." in Proceedings of the Proceedings 1999 ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Las Vegas, NV, September 12-15. Paper no. 99DETC/DAC-8612, 12 pp.
  213. Pederson, K. (1999) "Designing Platform Families: An Evolutionary Approach to Developing Engineering Systems." PhD disseration Thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  214. Roller, D. and Schaefer, D. (1999) "Windowsgestützte Software-Entwicklung im Ingenieurbereich: Stand der Technik - Erfahrungen - Trends." in Proceedings of the Software-Entwicklung: Methoden, Werkzeuge, Erfahrungen '99, Ostfildern, Germany, September 20-22, 1999. 41-62.
  215. Salido-Tercero, J., Paredis, C. J. J. and Khosla, P. K. (1999) "Continuous Probabilistic Mapping by Autonomous Robots." in Proceedings of the International Symposium on Experimental Robotics, Sydney, Australia, March 26-28. [pdf]
  216. Schaefer, D., Eck, O. and Roller, D. (1999) "Requirement Analysis for E-CAD Variant Modules." in Proceedings of the 32nd International Symposium on Automotive Technology and Automation: ISATA '99, Vienna, Austria, June 14-18, 1999. 43-51.
  217. Schaefer, D., Eck, O. and Roller, D. (1999) "A Shared Knowledge Base for Interdisciplinary Parametric Product Data Models in CAD." in Proceedings of the 12th International Conference on Engineering Design: ICED '99, Munich, Germany, August 24-26, 1999. 1593-1598.
  218. Schaefer, D. and Roller, D. (1999) Die Methods bestimmt das Ergebnis: Kosten- und Zeitreduzierung durch Varianten- und Komponententechnik. DER KONSTRUKTEUR, 30(1-2), 52-53
  219. Schaefer, D. and Roller, D. (1999) Elektro-CAD am Wendepunkt - Stand der Technik im ECAD. CAD WORLD, No. 5, 1999(36-38
  220. Schaefer, D. and Roller, D. (1999) Der CAD/CAM-Markt und seine Trends aus Anwendersicht, Teil 1. CAD-CAM REPORT, 18(9), 22-29
  221. Schaefer, D. and Roller, D. (1999) Der CAD/CAM-Markt und seine Trends aus Anwendersicht, Teil 2. CAD-CAM REPORT, 18(10), 116-120
  222. Schaefer, D. and Roller, D. (1999) "Software- und Systementwicklung für technische Anwendungen." Computer Graphik Markt 1999/2000. Dressler-Verlag:Heidelberg, Germany.
  223. Schaefer, D., Roller, D. and Wolf, K. (1999) "Advanced CAQ: Comparing Manufactured Products With Underlying CAD Models." in Proceedings of the 15th Conference on Computer-Aided Production Engineering: CAPE '99, Durham, UK, April 19-21, 1999. 273-280.
  224. Simpson, T., J.R.A. Maier, and F. Mistree (1999) "A Product Platform Concept Exploration Method for Product Family Design." in Proceedings of the ASME Design Theory and Methodology Conference, Las Vegas, NV.
  225. Simpson, T., Chen, W., Allen, J. K. and Mistree, F. (1999) "Use of the Robust Concept Exploration Method to Facilitate the Design of a Family of Products." In U. Roy and J. M. Usher Eds.) Simultaneous Engineering: Methodologies and Applications. Chapman-Hall:New York.
  226. Simpson, T. W., Maier, J. R. A. and Mistree, F. (1999) "A Product Platform Concept Exploration Method for Product Family Design." in Proceedings of the ASME Design Theory and Methodology.
  227. Sinha, R., Gupta, S. K., Paredis, C. J. J. and Khosla, P. K. (1999) "Extracting Articulation Models from CAD Models of Parts with Curved Surfaces." Research Report.
  228. Tsai, S.-J., Ferreira, E. D. and Paredis, C. J. J. (1999) "Control of the Gyrover: A Single-Wheel Gyroscopically Stabilized Robot." in Proceedings of the 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'99), Kyongju, Korea, October 17-21. 179-184. [pdf]
  229. Wang, C.-H. and Paredis, C. J. J. (1999) "On-Line Planning of Flexible Assembly Systems: An Agent-Based Approach." in Proceedings of the 15th ISPE/IEE International Conference on CAD/CAM, Robotics, and Factories of the Future, Aguas de Lindoia, Brazil, August 18-20. 13-18. [pdf]
  230. Bailey, R. R., Bras, B. A., Allen, J. K. and Mistree, F. (1998) Using Robust Concept Exploration and Systems Dynamics Models in the Design of Complex Industrial Ecosystems. Engineering Optimization, (accepted for publication)
  231. Coulter, S. L. (1998) "Reducing Environmental Impact through Systematic Product Evolution." Ph.D. Dissertation Thesis, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
  232. Coulter, S. L., Bras, B. A., Winslow, G. and Yester, S. (1998) Designing for Material Separation: Lessons from the Automotive Recycling. Journal of Mechanical Design, 120(3), 501-509
  233. Coulter, S. L., McIntosh, M. W., Bras, B. A. and Rosen, D. W. (1998) "Identification of Limiting Factors for Improving Design Modularity." in Proceedings of the 1998 ASME Design Theory and Methodology Conference, ASME Design Technical Conferences and Computers in Engineering Conference, Atlanta, Georgia, September 14-16. Paper no. 98-DETC/DTM-5593.
  234. Diaz-Calderon, A., Paredis, C. J. J. and Khosla, P. K. (1998) "A Modular Composable Software Architecture for The Simulation of Mechatronic Systems." in Proceedings of the ASME Design Engineering Technical Conference, 18th Computers in Engineering Conference, Atlanta, GA, 13-16 September 1998. Paper No. DETC98/CIE-5704. [pdf]
  235. Emblemsvåg, J. and Bras, B. (1998) "Financial Analysis, Critical Assumption Planning and Uncertainty in Product Development." in Proceedings of the 1998 International Conference on Achieving Excellence in New Product Development and Management, Atlanta, GA. 1 - 11.
  236. Emblemsvåg, J. and Bras, B. (1998) "Energy Accounting - A Step Towards Sustainability." in Proceedings of the Proceedings of the 42nd Annual Conference of The International Society for the Systems Sciences, Atlanta, GA, July 19 - 24 1998. Paper No. ISBN 0-9664183-0-1.
  237. Emblemsvåg, J. and Bras, B. A. (1998) "ISO 14000 and Activity-Based Life-Cycle Assessment in Environmentally Conscious Design and Manufacturing: A Comparison." in Proceedings of the 1998 ASME Design for Manufacture Conference, ASME Design Technical Conferences and Computers in Engineering Conference, Atlanta, Georgia, September 14-16. Paper no. 98-DETC/DFM-5734.
  238. Gupta, S. K., Paredis, C. J. J. and Brown, P. F. (1998) "Micro Planning for Mechanical Assembly Operations." in Proceedings of the 1998 IEEE International Conference on Robotics and Automation, Leuven, Belgium, May 16-20. 239-246. [pdf]
  239. Gupta, S. K., Paredis, C. J. J., Sinha, R., Wang, C.-H. and Brown, P. F. (1998) "An Intelligent Environment for Simulating Mechanical Assembly Operations." in Proceedings of the ASME Design Engineering Technical Conferences, Design for Manufacturing Conference, Atlanta, GA, 13-16 September 1998. Paper No. DETC98/DFM-5739. [pdf]
  240. Hammond, R., Amezquita, T. and Bras, B. (1998) Issues in Automotive Parts Remanufacturing Industry: Discussion of Results from Surveys Performed Among Remanufacturers. Journal of Engineering Design and Automation, Special Issue on Environmentally Conscious Design and Manufacturing, 4(1), 27-46
  241. Harper, B. and Rosen, D. W. (1998) "Computer-Aided Design for Product De- & Remanufacture." in Proceedings of the DETC98: 1998 ASME Design Engineering Technical Conference, Atlanta, Georgia.
  242. Harper, B. D. (1998) "A CAD Environment for De- and Remanufacturing Assessments." M.S. Thesis Thesis, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
  243. Harper, B. D. and Rosen, D. W. (1998) "A Computable Fastener Representation to Support Computer-Aided Configuration Design for the Life-Cycle." in Proceedings of the 1998 ASME Computers in Engineering Conference, ASME Design Technical Conferences and Computers in Engineering Conference, Atlanta, Georgia, September 14-16. Paper no. 98-DETC/CIE-5539.
  244. Hernandez, G., Allen, J. K., Simpson, T. W., Bascaran, E., Avila, L. F. and Salinas, F. (1998) "Robust Design of Product Families for Made-to-Order Systems." in Proceedings of the ASME Advances in Design Automation Conference, Atlanta, GA.
  245. Kalyan-Seshu, U. and Bras, B. A. (1998) "Towards Computer-Aided Design for the Life Cycle." in Proceedings of the 1998 IEEE International Symposium on Electronics and the Environment, Oak Brook, Illinois, May 4-6. 310-315.
  246. Kalyan-Seshu, U. and Bras, B. A. (1998) "Integrating DFX Tools with Computer-Aided Design Systems." in Proceedings of the 1998 ASME Design Automation Conference, ASME Design Technical Conferences and Computers in Engineering Conference, Atlanta, Georgia, September 14-16. Paper no. 98-DETC/DAC-5621.
  247. Kalyan-Seshu, U.-S. (1998) "Including Life Cycle Considerations in Computer Aided Design." M.S. Thesis Thesis, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
  248. Lewis, K. and Mistree, F. (1998) The Other Side of Multidisciplinary Design Optimization: Accommodating a Multiobjective, Uncertain, and Non-Deterministic World. Engineering Optimization, 31(2), 161-189
  249. Lewis, K. and Mistree, F. (1998) Collaborative, Sequential and Isolated Decisions in Design. ASME Journal of Mechanical Design, 120(4), 643-652
  250. Marston, M. and Mistree, F. (1998) "An Implementation of Expected Utility Theory in Decision Based Design." in Proceedings of the ASME DETC, Design Theory and Methodology, Atlanta, GA.
  251. McClurkin, J. and Rosen, D. W. (1998) Computer-aided Build Style Decision Support for Stereolithography. Rapid Prototyping Journal, 4(1), 4-13
  252. McIntosh, M. W. (1998) "Modeling the Value of Remanufacture in an Integrated Manufacture-Remanufacture Organization." M.S. Thesis Thesis, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
  253. McIntosh, M. W. and Bras, B. A. (1998) "Addressing Rapid Innovation and Mass Customization in an Integrated Manufacturing-Remanufacturing Organization." in Proceedings of the Fifth International Congress on Environmentally Conscious Design and Manufacture (Regenerative Design: The New Millenium), Rochester, New York, June 16-17.
  254. McIntosh, M. W. and Bras, B. A. (1998) "Determining the Value of Remanufacture in an Integrated Manufacturing-Remanufacturing Organization." in Proceedings of the 1998 ASME Design for Manufacture Conference, ASME Design Technical Conferences and Computers in Engineering Conference, Atlanta, Georgia, September 14-16. Paper no. 98-DETC/DFM-5750.
  255. Muster and Mistree (1998) The decision support problem technique in engineering design. The International Journal of Applied Engineering Education, 4(1), 23-33
  256. Ortega, R. A. and Bras, B. A. (1998) "Including Life Cycle Considerations in the Design of an Electric Vehicle Space Frame." in Proceedings of the 1998 ASME Design Automation Conference, ASME Design Technical Conferences and Computers in Engineering Conference, Atlanta, Georgia, September 14-16. Paper no. 98-DETC/DAC-5593, 12 pp.
  257. Roller, D. and Schaefer, D. (1998) Parametrische Modellierung - Situationsanalyse und Trends. CAD/CAM, 17(5), 96-104
  258. Roller, D., Schaefer, D. and Richert, U. (1998) Variantentechnologie in Elektrokonstruktion und Anlagenprojektierung. CAD-CAM REPORT, 17(9), 90-97
  259. Sachdev, S., Paredis, C. J. J., Gupta, S. K. and Talukdar, S. N. (1998) "3D Spatial Layouts using A-Teams." in Proceedings of the ASME Design Engineering Technical Conferences, Atlanta, GA, 13-16 September 1998. Paper No. DETC98/DAC-5628. [pdf]
  260. Schaefer, D. and Roller, D. (1998) Parametrische Produkt- und Prozessmodellierung. CAD-CAM REPORT, 17(10), 74-84
  261. Siddique, Z. and Rosen, D. W. (1998) "On the Applicability of Product Variety Design Concepts to Automotive Platform Commonality." in Proceedings of the ASME Design Theory and Methodology Conference, Atlanta, GA.
  262. Simpson, T., Lautenschlager, U., Mistree, F. (1998) "Mass Customization in the Age of Information: The Case for Open Engineering Systems." In W. H. R. Alan L. Porter (Ed. The Information Revolution Current and Future Consequences. Ablex Publishing Corporation:Greenwhich Connecticut.
  263. Simpson, T., Allen, J. K. and Mistree, F. (1998) "Spatial Correlation Metamodels for Global Approximation in Structural Optimization." in Proceedings of the ASME Advances in Design Automation, Atlanta, GA.
  264. Simpson, T., Lautenschlager, U. and Mistree, F. (1998) "Towards Mass Customization in the Age of Information: The Case for Open Engineering Systems." In W. Read and A. Porter Eds.) The Information Revolution: Present and Future. Ablex Publications:Greenwich, CT.
  265. Simpson, T. W., Lautenschlager, U. and Mistree, F. (1998) "Mass Customization in the Age of Information: The Case for Open Engineering Systems." In W. Read and A. Porter Eds.) The Information Revolution: Current and Future Consequences. Ablex Publications:Greeenwich, Connecticut.
  266. Simpson, T. W., Rosen, D., Allen, J. K. and Mistree, F. (1998) Metrics for Assessing Design Freedom and Information Certainty in the Early Stages of Design. ASME Journal of Mechanical Design, 120(4), pp. 628-635
  267. Sinha, R., Paredis, C. J. J., Gupta, S. K. and Khosla, P. K. (1998) "Capturing Articulation in Assemblies from Component Geometry." in Proceedings of the ASME Design Engineering Technical Conference, Atlanta, GA, 13-16 September 1998. Paper No. DETC98/DAC-5629. [pdf]
  268. Allen, J. K. and Rosen, D. W. (1997) "Design Methodology Issues in a Distributed Studio for Rapid Tooling and Molded Parts." in Proceedings of the CIRP International Design Seminar Proceedings: Multimedia Technologies for Collaborative Design and Manufacturing, Los Angeles, pp. 21-28, October 8-10, 1997, October 8-10, 1997. pp. 21-28, October 8-10, 1997.
  269. Bailey, R. (1997) "Designing Robust Industrial Ecosystems: A Systems Approach." M.S. Thesis Thesis, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
  270. Bailey, R., Allen, J. K., Bras, B. and Mistree, F. (1997) "A System Level Approach to the Design of an Industrial Ecosystem." in Proceedings of the 1995 ASME Design Automation Conference, Design Engineering Technical Conferences and Computers in Engineering Conference, Sacramento, California, September 14-17. Paper no. 97DETC/DAC-3962.
  271. Bauer, M. D. and Rosen, D. W. (1997) "An Approach to Integrated Product/Process Design via Virtual Prototyping." in Proceedings of the 1997 ASME Design Automation Conference, Design Engineering Technical Conferences and Computers in Engineering Conference, Sacramento, California, September 14-17. Paper no. 97DETC/DAC-3994.
  272. Bras, B. (1997) Incorporating Environmental Issues in Product Realization. United Nations Industry and Environment, 20(1-2), 7-13
  273. Bras, B. A. and Hammond, R. C. (1997) A Remanufacturability Assessment Method for Use in Product Design. Research in Engineering Design, (under review)
  274. Chen, W., Allen, J. K. and Mistree, F. (1997) A Robust Concept Exploration Method for Enhancing Concurrent Systems Design. Concurrent Engineering Research and Applications, 5(3), pp. 203-217
  275. Chen, W., Allen, J. K. and Mistree, F. (1997) A Robust Concept Exploration Method for Enhancing Productivity in Concurrent Systems Design. AIAA Journal, 35(5), 893-900
  276. Coulter, S. and Bras, B. (1997) Reducing Environmental Impact Through Planned Product Revisions. International Journal of Environmentally Conscious Design and Manufacturing, 6(2), 1-10
  277. Coulter, S. and Bras, B. (1997) "Improving Recyclability Through Planned Product Revisions." in Proceedings of the 1997 Total Life-Cycle Management Conference and Exposition (SAE P-311), Auburn Hills, Michigan, April 7-9., 121-130, SAE-Paper no. 971204.
  278. Coulter, S. L., Bras, B. A. and Rosen, D. W. (1997) Formulating and Solving Parametric Design Problems involving Non-Interference Constraints. Engineering with Computers, 13(112-124
  279. Emblemsvåg, J. and Bras, B. (1997) "An Activity-Based Life-Cycle Assessment Method." in Proceedings of the 1995 ASME Design for Manufacturing Symposium, Design Engineering Technical Conferences and Computers in Engineering Conference, Sacramento, California, September 14-17. Paper no. 97DETC/DFM-4376.
  280. Emblemsvåg, J. and Bras, B. A. (1997) A Method for Life-Cycle Design Cost Assessments using Activity-Based Costing and Uncertainty. Engineering Design and Automation, 3(4), 339-354
  281. Gupta, S. K., Paredis, C. J. J., Sinha, R., Wang, C.-H. and Brown, P. F. (1997) "Intelligent Assembly Modeling and Simulation." Technical Report, ICES#05-104-97. [pdf]
  282. Hendrix, J., Massey, K. A., Whitham, E., Bras, B. and Russell, M. (1997) Technologies for the Identification, Separation, and Recycling of Automotive Plastics. International Journal of Environmentally Conscious Design and Manufacturing, 6(2), 37-50
  283. Hooks, K., Bras, B. A. and Rosen, D. W. (1997) "Shared Information Structures for Product Design and Process Simulation in Design for the Life-Cycle." in Proceedings of the 1997 ASME Design Automation Conference, Design Engineering Technical Conferences and Computers in Engineering Conference, Sacramento, California, September 14-17. Paper no. 97DETC/DAC-3995.
  284. Kalyan-Seshu, U. and Bras, B. A. (1997) "Integrating I-DEAS with Remanufacturing and Assemblability Assessments." in Proceedings of the 1997 ASME Design Automation Conference, ASME Design Technical Conferences and Computers in Engineering Conference, Sacramento, California, September 14-17. Paper no. 97-DETC/DAC-72.
  285. Koch, P. N. (1997) "Hierarchical Modeling and Robust Synthesis for the Preliminary Design of Large-Scale Complex Systems." PhD Dissertation Thesis, G.W. Woodruff School of Mechanical Engineering,, Georgia Institute of Technology, Atlanta, GA.
  286. Koch, P. N., Allen, J. K., Mistree, F. and Mavris, D. (1997) "The Problem of Size in Robust Design." in Proceedings of the ASME Advances in Design Automation, Sacramento, CA.
  287. Lewis, K. and Mistree, F. (1997) "Collaborative, sequential, and isolated decisions in design." in Proceedings of the Proceedings of ASME Design Theory and Methodology Conference, August. Paper No. Lewi97.
  288. Lewis, K. and Mistree, F. (1997) Modeling Interaction in Multidisciplinary Design: A Game Theoretic Approach. AIAA Journal, 35(8), 1387-1392
  289. Marston, M., Bras, B. and Mistree, F. (1997) "The Applicability of the Axiomatic and Decision-Based Design Equations in Variant Design." in Proceedings of the 1995 ASME Design Theory and Methodology Conference, Design Engineering Technical Conferences and Computers in Engineering Conference, Sacramento, California, September 14-17. Paper no. 97DETC/DTM-3884.
  290. Mistree, F., Allen, J. (1997) ME 3110 Handbook. Atlanta.
  291. Paredis, C. J. J., Brown, H. B. and Khosla, P. K. (1997) A Rapidly Deployable Manipulator System. Robotics and Autonomous Systems, 21(3), 289-304
  292. Paredis, C. J. J. and Khosla, P. K. (1997) "Task-Based Design of Manipulators: An Agent-Based Approach." in Proceedings of the 1997 ASME Design Engineering Technical Conferences, Design Automation Conference, Sacramento, CA, September 14-17. Paper No. DETC97/DAC-3853. [pdf]
  293. Paredis, C. J. J. and Khosla, P. K. (1997) "RMMS: Reconfigurable Modular Manipulator System Project (Video)." in Proceedings of the 1997 IEEE International Conference on Robotics and Automation, Albuquerque, NM, April 20-25.
  294. Paredis, C. J. J. and Khosla, P. K. (1997) "Agent-Based Design of Fault Tolerant Manipulators for Satellite Docking." in Proceedings of the 1997 IEEE International Conference on Robotics and Automation, Albuquerque, NM, April 20-25. 3473-3480. [pdf]
  295. Peplinski, J. D. and Mistree, F. (1997) "A Decision-Based Approach to Enterprise Design and Integration." In S. Ganesan (Ed. Advances in Concurrent Engineering. Technomic Publishing:Rochester, MI.
  296. Pierce, S. and Rosen, D. W. (1997) "NURBS-Based Variational Modeling as a Tool for the Analysis of Geometric Tolerances." in Proceedings of the 1997 ASME Design Automation Conference, Design Engineering Technical Conferences and Computers in Engineering Conference, Sacramento, California, September 14-17. Paper no. 97DETC/DAC-3993.
  297. Rao, J. R. J., Badhrinath, K., Pakala, R. and Mistree, F. (1997) A Study of Optimal Design Under Conflict Using Models of Multi-Player Games. Engineering Optimization, 28(63-94
  298. Siddique, Z., Rosen, D. W. (1997) A Virtual Prototyping Approach to Product Disassembly Reasoning. Computer-Aided Design, 29(12), 847-860
  299. Siddique, Z. and Rosen, D. W. (1997) Automated Product Disassembly Reasoning. Computers-Aided Design, (in press)(
  300. Allen, J. K. (1996) The Decision to Introduce New Technology: The Fuzzy Preliminary Selection Decision Support Problem. Engineering Optimization, 26(1), 61-77
  301. Amezquita, T. and Bras, B. A. (1996) "Lean Remanufacture of an Automobile Clutch." in Proceedings of the First International Workshop on Reuse, Eindhoven, The Netherlands, November 10-13. 35-52.
  302. Bauer, M. D., Siddique, Z. and Rosen, D. W. (1996) "Virtual Prototyping in Simultaneous Product/Process Design for Disassembly." In J. Dong (Ed. Rapid Response Manufacturing: Contemporary Methodologies.
  303. Bauer, M. D., Siddique, Z. and Rosen, D. W. (1996) "Design for Disassembly via Virtual Prototyping." in Proceedings of the Flexible Automation and Intelligent Manufacturing (FAIM 96) Conference, Atlanta, Georgia.
  304. Bras, B. (1996) "Industrial Ecology – A Study for the Army Environmental Policy Institute." AEPI-Interagency Personel Agreement Report, Final Report.
  305. Bras, B., Bailey, R., Allen, J. K. and Mistree, F. (1996) "Designing Sustainable and Competitive Systems in the Context of Industrial Ecology." AEPI Report, Report to AEPI.
  306. Bras, B. A. and Emblemsvåg, J. (1996) "Designing for the Life Cycle: Activity-Based Costing and Uncertainty." In G. Q. Huang (Ed. Design for X: Concurrent Engineering Imperatives (Chapter 19). Chapmann & Hall:London.
  307. Chen, W., Allen, J. K., Mavris, D. and Mistree, F. (1996) A Concept Exploration Method for Determining Robust Top-Level Specifications. Engineering Optimization, 26(2), 137-158
  308. Chen, W., Allen, J. K., Tsui, K.-L. and Mistree, F. (1996) A Procedure for Robust Design: Minimizing Variations Caused by Noise Factors and Control Factors. ASME Jounal of Mechanical Design, 118(4), 478-485
  309. Chen, W., Mavris, D. N. and Mistree, F. (1996) A Concept Exploration Method for Determining Robust Top-Level Specifications. Engineering Optimization, 26(2), pp. 137-158
  310. Coulter, S. and Bras, B. (1996) "Reducing Environmental Impact Through Planned Product Revisions." in Proceedings of the 4th International Conference on Environmentally Conscious Design and Manufacturing, Cleveland, Ohio, July 23-25. 197-206.
  311. Coulter, S. L., Bras, B. A., Winslow, G. and Yester, S. (1996) "Designing for Material Separation: Lessons from the Automotive Recycling." in Proceedings of the 1996 ASME Design for Manufacturing Symposium, ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Irvine, California, August 18-22, August 22-24. Paper no. 96-DETC/DFM-1270.
  312. Hammond, R. C. (1996) "Development of Design Metrics for Remanufacturing." M.S. Thesis Thesis, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
  313. Hammond, R. C. and Bras, B. A. (1996) "Design for Remanufacturing Metrics." in Proceedings of the First International Workshop on Reuse, Eindhoven, The Netherlands, November 10-13. 5-22.
  314. Hrinyak, M. J., Bras, B. and Hoffman, W. F. (1996) "Enhancing Design for Disassembly: A Benchmark of DFD Software Tools." in Proceedings of the 1996 ASME Design for Manufacturing Symposium, ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Irvine, California, August 18-22, August 22-24. Paper no. 96-DETC/DFM-1271.
  315. Lewis, K. (1996) "An Algorithm for Integrated Subsystem Embodiment and System Synthesis." Ph.D. Dissertation Thesis, GWW School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  316. Newcomb, P. J., Bras, B. A. and Rosen, D. W. (1996) "Implications of Modularity on Product Design for the Life Cycle." in Proceedings of the 1996 ASME Design Theory and Methodology Conference, ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Irvine, California, August 22-24. Paper no. 96-DETC/DTM-1516.
  317. Paredis, C. J. J. (1996) "An Agent-based Approach to the Design of Rapidly Deployable Fault Tolerant Manipulators." Ph.D. Thesis, Department of Electrical and Computer Engineering, Carnegie Mellon University, Pittburgh, PA. [pdf]
  318. Paredis, C. J. J., Brown, H. B. and Khosla, P. K. (1996) "A Rapidly Deployable Manipulator System." in Proceedings of the 1996 IEEE International Conference on Robotics and Automation, Minneapolis, MN, 22-28 April 1996. 1434-1439. [pdf]
  319. Paredis, C. J. J. and Khosla, P. K. (1996) Fault Tolerant Task Execution through Global Trajectory Planning. Reliability Engineering and Systems Safety, 53(3), 225-235.[pdf]
  320. Paredis, C. J. J. and Khosla, P. K. (1996) Designing Fault Tolerant Manipulators: How Many Degrees-of-Freedom? International Journal of Robotics Research, 15(6), 611-628.[pdf]
  321. Pierce, S. and Rosen, D. W. (1996) "Free-Form Surface Modeling as a Tool for the Analysis and Selection of Assembly Tolerances." in Proceedings of the 29th International Symposium on Automotive Technology & Automation (ISATA), Florence, Italy, June 3-6.
  322. Rosen, D. W. (1996) "Design of Modular Product Architectures in Discrete Design Spaces Subject to Life Cycle Issues." in Proceedings of the ASME Advances in Design Automation Conference, Irvine, CA.
  323. Rosen, D. W., Bras, B. A., Hassenzahl, S. L., Newcomb, P. J. and Yu, T. (1996) Computer-Aided Design for the Life-Cycle. Journal of Intelligent Manufacturing, 7(145-160
  324. Rosen, D. W. and Peters, T. J. (1996) The Role of Topology in Engineering Design Research. Research in Engineering Design, (accepted for publication)
  325. Schaefer, D. (1996) "Interpolation mittels lokaler Interpolierender und Blendetechniken." Masters Thesis, Mathematics and Computer Science, Gerhard Mercator Universität/Gesamthochschule Duisburg, Duisburg, Germany.
  326. Siddique, Z. (1996) "Conversion of CAD Model Data for Virtual Prototypes for Disassembly." Masters Thesis Thesis, Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
  327. Siddique, Z. and Rosen, D. W. (1996) "An Approach to Virtual Prototyping for Product Disassembly." in Proceedings of the ASME Computers in Engineering Conference, Irvine, California, August 22-24.
  328. Simpson, T., Chen, W., Allen, J. K. and Mistree, F. (1996) "Conceptual Design of a Family of Products Through the Use of the Robust Concept Exploration Method." in Proceedings of the AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Bellevue, Washington, September 4-6. 1535-1545.
  329. Amezquita, T., Hammond, R. and Bras, B. (1995) "Characterizing the Remanufacturability of Engineering Systems." in Proceedings of the 1995 ASME Advances in Design Automation Conference, DE-Vol. 82, Boston, Massachusetts, September 17-21. 271-278.
  330. Amezquita, T., Hammond, R. and Bras, B. (1995) "Design for Remanufacturing." in Proceedings of the 10th International Conference on Engineering Design (ICED 95), Praha, Czech Republic, August 22-24. 1060-1065.
  331. Bras, B., Mistree, F. (1995) A Compromise Decision Support Problem for Axiomatic and Robust Design. ASME Journal of Mechanical Design, 117(1), 10-19
  332. Bras, B., Hmelo, C., Mulholland, J. and Realff, M. (1995) "A Problem Based Curriculum for Sustainable Technology." in Proceedings of the Proceedings Second Congress on Computing in Civil Engineering, Atlanta, Georgia, June 5-7. 326-333.
  333. Chen, W. (1995) "A Robust Concept Exploration Method for Configuring Complex Systems. PhD Dissertation." PhD Dissertation Thesis, Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
  334. Chen, W., Allen, J. K. and Mistree, F. (1995) "Robust Concept Exploration by Combining Taguchi and Response Surface Models." in Proceedings of the 36th Structures, Structural Dynamics, and Materials Conference, New Orleans, LA.
  335. Chen, W., Allen, J. K., Mistree, F. and Tsui, K. L. (1995) "Integration of Response Surface Methods with the Compromise Decision Support Problem in Developing a General Robust Design Procedure." in Proceedings of the 21st ASME Design Automation Conference, Boston, MA.
  336. Chen, W., Tsui, K. W., Allen, J. and Mistree, F. (1995) "Integration of the Response Surface Methodology with the Compromise Decision Support Problem in Developing a General Robust Design Procedure." in Proceedings of the Advances in Design Automation, Boston, MA. 485-492.
  337. Coulter, S., Bras, B. A. and Foley, C. (1995) "A Lexicon of Green Engineering Terms." in Proceedings of the 10th International Conference on Engineering Design (ICED 95), Praha, Czech Republic, August 22-24. 1033-1039.
  338. Coulter, S., Rosen, D. W. and Bras, B. (1995) "Dynamic Non-Interference Constraints in Goal-Directed Geometry." in Proceedings of the 1995 ASME Advances in Design Automation Conference, DE-Vol. 82, Boston, Massachusetts. 907-914.
  339. Emblemsvåg, J. and Bras, B. (1995) "The Use of Activity-Based Costing, Uncertainty, and Disassembly Action Charts in Demanufacture Cost Assessments." in Proceedings of the 1995 ASME Advances in Design Automation Conference, DE-Vol. 82, Boston, Massachusetts, September 17-21. 285-292.
  340. Erikstad, S. O., Lautenschlager, U., Bras, B. A., Allen, J. K. and Mistree, F. (1995) Integrating Robustness into a Multi-Objective Space Vehicle Design Process. AIAA Journal of Guidance, Control, and Dynamics, 18(5), 1163-1168
  341. Heidler, J. S., Thompson, J. C., Hrinyak, M. J. and Mistree, F. (1995) "Designing Student-Centered Learning Into a Multi-Media Classroom: One Small Step." in Proceedings of the 1995 ASME Design Theory and Methodology Conference, DE-Vol. 83, Boston, Massachusetts, September 17-21. 517-524.
  342. Hmelo, C., Shikano, T., Realff, M., Bras, B., Mulholland, J. and Vanegas, J. A. (1995) "A Problem-Based Course in Sustainable Technology." in Proceedings of the Frontiers in Education (FIE '95), Atlanta, Georgia, November. 4a3.1.
  343. Hmelo, C., Vanegas, J. A., Realff, M., Bras, B., Mulholland, J., Shikano, T. and Guzdial, M. (1995) "Technology Support for Collaborative Learning in a Problem-Based Curriculum for Sustainable Technology." in Proceedings of the Proceedings of CSCL '95: The First International Conference on Computer Support for Collaborative Learning, Hillsdale, New Jersey, October. 169-172.
  344. Lewis, K., F. Mistree (1995) "On Developing a Taxonomy for Multidisciplinary Design Optimization: A Decision-Based Perspective." in Proceedings of the First World Congress of Structural and Multidisciplinary Optimization, Oxford, UK. 811-818.
  345. Paredis, C. J. J. and Khosla, P. K. (1995) "Design of Modular Fault Tolerant Manipulators." In K. Goldberg, D. Halperin, J.-C. Latombe and R. Wilson Eds.) Algorithmic Foundations of Robotics. A. K. Peters:Boston.
  346. Paredis, C. J. J. and Khosla, P. K. (1995) "Global Trajectory Planning for Fault Tolerant Manipulators." in Proceedings of the 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'95), Pittsburgh, PA, August 5-9. 428-434. [pdf]
  347. Rosen, D. W., Bras, B., Mistree, F. and Goel, A. (1995) "Virtual Prototyping for Product Demanufacture and Service Using a Virtual Design Studio Approach." in Proceedings of the ASME Computers in Engineering Conference, Boston, Massachusetts, September 17-20. 951-958.
  348. Simpson, T. and Mistree, F. (1995) "The What and Why of Open Engineering Systems."
  349. Vadde, S., Allen, J. K. and Mistree, F. (1995) Catalog Design: Selection Using Available Assets. Engineering Optimization, 25(pp. 45-64
  350. Bras, B. A. and Mistre, F. (1994) Concurrent Axiomatic and Robust Design using Compromise Decision Support Problems. Concurrent Engineering Research and Applications, 2(1), 17-32
  351. Bras, B. A., Peplinski, J., Koch, P. N. and Allen, J. K. (1994) "Environmentally Conscious Design based on Living Systems Theory." in Proceedings of the 1994 ASME Design Theory and Methodology Conference, Minneapolis.
  352. Chen, W., Rosen, D., Allen, J. K. and Mistree, F. (1994) Modularity and the Independence of Functional Requirements in Designing Complex Systems. Concurrent Product Design (R. Gadh, Ed.), ASME DE 74(31-38
  353. Coulter, S. L. (1994) "Representation of Gerometric Constraints in Parametric Synthesis." M.S. Thesis Thesis, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
  354. Emblemsvåg, J. and Bras, B. A. (1994) "Activity-Based Costing in Design for Product Retirement." in Proceedings of the Proceedings 1994 ASME Advances in Design Automation Conference, DE-Vol. 69-2, Minneapolis, Sept. 11-14. 351-362.
  355. Lewis, K., Lucas, T. and Mistree, F. (1994) "A Decision Based Approach to Developing Ranged Top-Level Aircraft Specifications: A Conceptual Exposition." in Proceedings of the 5th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Panama City, FL. pp. 465-481.
  356. Mistree, F., Lewis, K., Stonis, L. (1994) "Selection in the Design of Aircraft." in Proceedings of the 5th AIAA/USAF/NASA/ISSMO Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, Panama City, FL. 1153-1166.
  357. Mistree, F., Lewis, K. and Stonis, L. (1994) "Selection in the Conceptual Design of Aircraft." in Proceedings of the 5th AIAA/USAF/NASA/ISSMO Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, Panama City, FL. 1153-1166.
  358. Paredis, C. J. J., Au, W. K. and Khosla, P. K. (1994) Kinematic Design of Fault Tolerant Manipulators. Computers and Electrical Engineering, 20(3), 211-220
  359. Paredis, C. J. J. and Khosla, P. K. (1994) "Mapping Tasks into Fault Tolerant Manipulators." in Proceedings of the 1994 IEEE International Conference on Robotics and Automation, San Diego, CA, 8-13 May 1994. 696-703. [pdf]
  360. Rothe, A., Bras, B. A. and Mistree, F. (1994) A Design Parameter Based Monetary Indication of Recyclability. Submitted to Research in Engineering Design
  361. Scheuring, J. F., Bras, B. A. and Lee, K.-M. (1994) Significance of Design for Disassembly in Integrated Disassembly and Assembly Processes. International Journal of Environmentally Conscious Design and Manufacturing, 3(2), 21-33
  362. Scheuring, J. F., Bras, B. A. and Lee, K.-M. (1994) "Effects of Design for Disassembly on Integrated Disassembly and Assembly Processes." in Proceedings of the Fourth International Conference on Computer Integrated Manufacturing and Automation Technology, Rensselaer Polytechnic Institute, Troy, New York, October 10-12. 53-59.
  363. Smith, W. F. and Mistree, F. (1994) "The Development of Top-Level Ship Specifications: A Decision-Based Approach." in Proceedings of the 5th International Conference on Marine Design, Delft, The Netherlands. 59-76.
  364. Vadde, S., Allen, J. K., Lucas, T. and Mistree, F. (1994) "On Modeling Design Evolution Along a Design Timeline." in Proceedings of the Proceedings of the 5th AIAA/NASA/USAF/ISSM Symposium on Multidisciplinary Analysis and Optimization, Panama City, Florida, Sept 7-9. 1474-1482.
  365. Vadde, S., Allen, J. K. and Mistree, F. (1994) Compromise Decision Support Problems for Hierarchical Design Involving Uncertainty. Computers and Structures, 52(4), 645-658
  366. Vadde, S., Allen, J. K. and Mistree, F. (1994) Modeling Uncertainty in the Combined Kinematic and Dynamic Synthesis of a Four-Bar Linkage. Engineering Optimization, 23(1), 1-15
  367. Vadde, S., Krishnamachari, R. S., Allen, J. K. and Mistree, F. (1994) The Bayesian Compromise Decision Support Problem for Multilevel Design Involving Uncertainty. ASME Journal of Mechanical Design, 116(388-395
  368. VerGow, Z. J. (1994) "Modeling and Solving Coupled Decision Problems in Design for Recycling." M.S. Thesis Thesis, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia.
  369. VerGow, Z. J. and Bras, B. A. (1994) "Recycling Oriented Fasteners - A Critical Evaluation of VDI 2243's Selection Table." in Proceedings of the Proceedings 1994 ASME Advances in Design Automation Conference, DE-Vol. 69-2, Minneapolis, Sept. 11-14. 341-350.
  370. Bras, B. (1993) "The role of environmentally consious design in concurrent engineering." in Proceedings of the ITESM, Monterrey.
  371. Bras, B. A. and Karandikar, H. M. (1993) "ECO-PROBE: A Tool for Probing Environmental Impact of Evolving Designs."
  372. Bras, B. A. and Mistree, F. (1993) Robust Design using Compromise Decision Support Problems. Engineering Optimization, 21(213-239
  373. Bras, B. A. and Mistree, F. (1993) "A Compromise Decision Support Problem for Axiomatic and Robust Design." in Proceedings of the 1993 ASME Design Technical Conferences - 19th Design Automation Conference, Albuquerque, New Mexico. 359-369.
  374. Chen, W., Allen, J., Mistree, F. (1993) Hierarchical Selection in Gas Turbine Maintenance Management. Advances in Design Automation, 1(87-95
  375. Chen, W., Allen, J. and Mistree, F. (1993) "Hierarchical Selection in Gas Turbine Maintenance Management." in Proceedings of the Advances in Design Automation, New York, NY. 87-96.
  376. Chen, W., Allen, J. K. and Mistree, F. (1993) "Hierarchical Selection in Gas Turbine Maintenance Management." in Proceedings of the ASME Advances in Design Automation.
  377. Karandikar, H. M. and Mistree, F. (1993) "Modeling Concurrency in the Design of Composite Structures." In M. P. Kamat (Ed. Structural Optimization: Status and Promise. AIAA:Washington, D.C.
  378. Mahajan, P. V., Poli, C., Rosen, D. W. and Wozny, M. J. (1993) "Design for Stamping: A Feature-based Approach." in Proceedings of the Design for Manufacturability, ASME Winter Annual Meeting. Paper No. MPRW:93, 29-49.
  379. Mistree, F., Hughes, O.F., and Bras, B. (1993) "The Compromise Decision Support Problem and the Adaptive Linear Programming Algorithm." In M. P. Kamat (Ed. Structural Optimization: Status and Promise. AIAA:Washington, D.C.
  380. Mistree, F., W. F. Smith, B. A. Bras (1993) "A Decision Based Approach to Concurrent Engineering." Handbook of Concurrent Engineering. Chapman and Hall:New York.
  381. Mistree, F., Allen, J. K. and Attia, F. (1993) Designing at the Function Level of Abstraction. (in press)
  382. Mistree, F., Bras, B. A., Smith, W. F. and Allen, J. K. (1993) "Modeling Design Processes: A Conceptual, Decision-Based Approach." In M. e. Waldron (Ed. Mechanical Design Theory and Methodology. Springer-Verlag:New York.
  383. Mistree, F., Hughes, O. F. and Bras, B. A. (1993) "The Compromise Decision Support Problem and the Adaptive Linear Programming Algorithm." In M. P. Kamat (Ed. Structural Optimization: Status and Promise. AIAA:Washington, D.C.
  384. Mistree, F., Smith, W. F. and Bras, B. A. (1993) "A Decision-Based Approach to Concurrent Engineering." In H. R. Paresai and W. Sullivan Eds.) Handbook of Concurrent Engineering. Chapman & Hall:New York.
  385. Paredis, C. J. J. and Khosla, P. K. (1993) Kinematic Design of Serial Link Manipulators from Task Specifications. International Journal of Robotics Research, 12(3), 274-287
  386. Paredis, C. J. J. and Khosla, P. K. (1993) "Synthesis Methodology for Task Based Reconfiguration of Modular Manipulator Systems." in Proceedings of the Sixth International Symposium on Robotics Research, Hidden Valley, PA, October 2-5. [pdf]
  387. Allen, J. K., Krishnamachari, R. S., Masetta, J., Pearce, D., Rigby, D. and Mistree, F. (1992) Fuzzy Compromise: An Effective Way to Solve Hierarchical Design Problems. Structural Optimization, Vol. 4(21-43
  388. Au, W. K., Paredis, C. J. J. and Khosla, P. K. (1992) "Kinematic Design of Fault Tolerant Manipulators." in Proceedings of the Allerton Conference, Urbana-Champagne, IL.
  389. Bascaran, E., Karandikar, H., Mistree, F. (1992) "Modeling Hierarchy in Decision-Based Design: A Conceptual Exposition." in Proceedings of the 4th International Conference on Design Theory and Methodology, Scottsdale, AZ, September 13-16, 1992. 293-300.
  390. Bascaran, E., Karandikar, H. M. and Mistree, F. (1992) "Modeling Hierarchy in Decision-Based Design: A Conceptual Exposition." In L. A. Stauffer and D. L. Taylor Eds.) Design Theory and Methodology 92. ASME:New York.
  391. Bras, B. A. (1992) "Designing Design Processes for Decision-Based Concurrent Engineering." in Proceedings of the CERC's First Workshop on Product Development, Process Modeling and Characterization, Morgantown, West-Virginia. 7-9.
  392. Kamal, S. Z., Garson, J. and Mistree, F. (1992) "Heuristic Decision Support Problems: Integrating Heuristic Search and Expert Systems for the Design of Continuous Manufactured Products." In J. S. Gero and F. Sudweeks Eds.) Artificial Intelligence in Design '92. Kluwer Academic Publishers:Boston, Massachusetts.
  393. Karandikar, H., Mistree, F. (1992) An Approach for Concurrent and Integrated Material Selection and Dimensional Synthesis. Journal of Mechanical Design, 114(633-641
  394. Karandikar, H. M. and Mistree, F. (1992) Tailoring Composite Materials Through Optimal Selection of Their Constituents. 114(3), 451-458
  395. Karandikar, H. M. and Mistree, F. (1992) An Approach for Concurrent and Integrated Material Selection and Dimensional Synthesis. 114(4), 633-641
  396. Karandikar, H. M. and Mistree, F. (1992) Designing a Composite Material Pressure Vessel for Manufacture: A Case Study for Concurrent Engineering. Engineering Optimization, 18(4), 235-262
  397. Lautenschlager, U., Erikstad, S. O., Bras, B. A. and Mistree, F. (1992) "Quality Design of Decision Models." in Proceedings of the Fourth Annual National Symposium on Concurrent Engineering, Washington, DC, June 4-5. 423-441.
  398. Reddy, R. and Mistree, F. (1992) "Modeling Uncertainty in Selection using Exact Interval Arithmetic." In L. A. Stauffer and D. L. Taylor Eds.) Design Theory and Methodology 92. ASME:New York.
  399. Reddy, R., Smith, W. F., Mistree, F., Bras, B. A., Chen, W., Malhotra, A., Badhrinath, K., Lautenschlager, U., Pakala, R., Vadde, S. and Patel, P. (1992) "DSIDES User Manual." SDL/REP.7.1/92.
  400. Rosen, D. W., Dixon, R. J. and Poli, C. (1992) "Features and Algorithms for Tooling Cost Evaluation in Injection Molding and Die Casting." in Proceedings of the Proceedings of the ASME Computers in Engineering Conference. Paper No. Rosen-et-al:1992.
  401. Vadde, S., Allen, J. K. and Mistree, F. (1992) "Catalog Design: Design using Available Assets." In D. A. Hoeltzel (Ed. Advances in Design Automation. ASME:New York.
  402. Vadde, S., Swadi, S., Bhattacharya, N., Mistree, F. and Allen, J. K. (1992) "Design of an Aircraft Tire: A Study in Modeling Uncertainty." In D. A. Hoeltzel (Ed. Advances in Design Automation. ASME:New York.
  403. Zhou, Q.-J., Allen, J. K. and Mistree, F. (1992) Decisions Under Uncertainty: The Fuzzy Compromise Decision Support Problem. Engineering Optimization, 20(21-43
  404. Bras, B., Mistree, F. (1991) Designing Design Processes in Decision-Based Concurrent Engineering. SAE Transactions Journal of Materials & Manufacturing, 451-458
  405. Bras, B. A., Garson, J. and Mistree, F. (1991) "Using Natural Language Processing Techniques in Modeling Design Processes." in Proceedings of the Proceedings World Congress on Expert Systems, Orlando, Florida. 3064-3074.
  406. Bras, B. A. and Mistree, F. (1991) "Designing Design Processes in Decision-Based Concurrent Engineering." SAE Transactions, Journal of Materials & Manufacturing (SAE Paper 912209). SAE International:Warrendale, Pennsylvania.
  407. Kamal, S. Z., Garson, J., VanArsdale, W. E. and Mistree, F. (1991) "Development of a Synthesis Engine for the Design of Products Made by Process Manufacturing." in Proceedings of the 1991 IEEE, International Conference on Systems, Man and Cybernetics, University of Virginia, Charlottesville. 1839-1846.
  408. Karandikar, H. M. and Mistree, F. (1991) The Integration of Information from Design and Manufacture Through Decision Support Problems. 44(No. 11, Part 2), 150-159
  409. Karandikar, H. M., Rao, J. R. and Mistree, F. (1991) "Sequential vs. Concurrent Formulations for Synthesis of Engineering Designs." In G. A. Gabrielle (Ed. Advances in Design Automation. ASME:New York.
  410. Karandikar, S., Bras, B. and Mistree, F. (1991) "Visualization and Manipulation of Design Related Information and Knowledge." in Proceedings of the Joint International Conference on Factory Automation and Information Management, University of Limerick, Ireland. 793-803.
  411. Mistree, F. and Bras, B. A. (1991) "Concurrent Engineering: A Decision-Based Approach." Report No. SDL/REP.9/91.
  412. Mistree, F., Karandikar, S., Bras, B. A. and Bollam, T. (1991) "Formulation, Storage and Solution of Decision Support Problems in a Concurrent Engineering Environment." in Proceedings of the Third National Symposium on Concurrent Engineering, Washington, D.C., 625-645.
  413. Mistree, F., Smith, W. F., Kamal, S. Z. and Bras, B. A. (1991) "Designing Decisions: Axioms, Models and Marine Applications." in Proceedings of the Fourth International Marine Systems Design Conference, Kobe, Japan. 1-24.
  414. Paredis, C. J. J. and Khosla, P. K. (1991) "An Approach for Mapping Kinematic Task Specifications into a Manipulator Design." in Proceedings of the Fifth International Conference on Advanced Robotics, Pisa, Italy. 556-561. [pdf]
  415. Paredis, C. J. J. and Khosla, P. K. (1991) "On Kinematic Design of Serial Link Manipulators." in Proceedings of the International Symposium on Intelligent Robotics (ISIR), Bangalore, India, January 25. 517-531.
  416. Srinivasan, R., Karandikar, H. M. and Mistree, F. (1991) Understanding Design-Manufacture Interaction using Compromise Decisions Support Problems Part III: Design for Manufacture of Composite Pressure Vessels. 40(3), 705-717
  417. Vadde, S., Krishnamachari, R. S., Allen, J. K. and Mistree, F. (1991) "The Bayesian Compromise Decision Support Problem for Hierarchical Design Involving Uncertainty." In G. A. Gabriele (Ed. Advances in Design Automation.
  418. Allen, J. K., Krishnamachari, R. S., Masetta, J., Pearce, D., Rigby, D. and Mistree, F. (1990) "Fuzzy Compromise: An Effective Way to Solve Hierarchical Design Problems." in Proceedings of the Proceedings Third Air Force/NASA Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, San Francisco, California. 141-147.
  419. Bras, B., Smith, W. F. and Mistree, F. (1990) "The Development of a Design Guidance System for the Early Stages of Design." In G. v. Oortmerssen (Ed. CFD and CAD in Ship Design. Elsevier Science Publishers B.V.:Wageningen, The Netherlands.
  420. Karandikar, H. M., Fuchs, W. J., Mistree, F., and Eschenauer, H. (1990) Compromise: An Effective Approach for Designing Composite Conical Shell Structures. ASME Journal of Mechanical Design, 112(2), 362-368
  421. Karandikar, H. M., Fuchs, W. J., Mistree, F. and Eschenauer, H. (1990) Compromise: An Effective Approach for Designing Composite Conical Shell Structures. 112(2), 362-368
  422. Mistree, F. and Muster, D. (1990) "Conceptual Models for Decision-Based Concurrent Engineering Design for the Life Cycle." in Proceedings of the Proceedings of the Second National Symposium on Concurrent Engineering, Morgantown, West Virginia. 443-467.
  423. Mistree, F., Muster, D., Srinivasan, S. and Mudali, S. (1990) Design of Linkages: A Conceptual Exercise in Designing for Concept. Mechanism and Machine Theory, 25(3), 273-286
  424. Mistree, F., Smith, W. F., Bras, B., Allen, J. K. and Muster, D. (1990) "Decision-Based Design: A Contemporary Paradigm for Ship Design." Transactions, Society of Naval Architects and Marine Engineers. Jersey City, New Jersey.
  425. Mistree, F., Smith, W. F., Bras, B. A., Allen, J. K. and Muster, D. (1990) Decision-Based Design: A Contemproary Paradigm for Ship Design. Transactions, Society of Naval Architects and Marine Engineers, 98(pp. 565-597
  426. Muster, D. and Mistree, F. (1990) Issues in Engineering Design Research as Engineering Design Moves from an Art towards a Science. American Journal of Engineering Education
  427. Allen, J. K., Hong, J., Adyanthaya, S. and Mistree, F. (1989) "The Decision Support Problem Technique Workbook for Life Cycle Engineering."
  428. Allen, J. K., Simovich, G. and Mistree, F. (1989) "Selection Under Uncertain Conditions: A Marine Application." in Proceedings of the Fourth International Symposium on Practical Design of Ships and Mobile Units, Varna, Bulgaria. 80.1-80.8.
  429. Bascaran, E., Bannerot, R. B. and Mistree, F. (1989) Hierarchical Selection Decision Support Problems in Conceptual Design. Engineering Optimization, 14(207-238
  430. Bascaran, E., Bannerot, R. B. and Mistree, F. (1989) Hierarchical Selection Decision Support Problems in Conceptual Design. Engineering Optimization, 14(207-238
  431. Bascaran, F., Bannerot, R. B. and Mistree, F. (1989) Hierarchical Selection Decision Support Problems in Conceptual Design. Engineering Optimization, 14(pp. 207-238
  432. Kamal, S. Z., Mistree, F., Sorab, J. and VanArsdale, W. E. (1989) "The Development of an Inductive Learning System for Design using Experimental Information." in Proceedings of the Fourth International Conference on Applications of Artificial Intelligence in Engineering, Cambridge, United Kingdom. 521-537.
  433. Mistree, F., D. Muster, J. A. Shupe, J. K. Allen (1989) Decision-Based Perspective for the Design of Methods for Systems Design. Recent Experiences in Multidisciplinary Analysis and Optimization
  434. Mistree, F., Kamal, S. Z. and Bras, B. A. (1989) "DSIDES: Decision Support in the Design of Engineering Systems."
  435. Mistree, F., Muster, D., Shupe, J. A. and Allen, J. K. (1989) "A Decision-Based Perspective for the Design of Methods for Systems Design." in Proceedings of the Recent Experiences in Multidisciplinary Analysis and Optimization, Hampton, Virginia. ••••.
  436. Muster, D. and Mistree, F. (1989) Engineering Design as it Moves from an Art towards a Science: Its Impact on the Education Process. The International Journal of Applied Engineering Education, 5(2), 239-246
  437. Muster, D., Mistree, F. and Allen, J. K. (1989) "Partitioning and Planning for Unified Life-Cycle Engineering Design: A Conceptual Exposition." USAF Contract FY 1457-88-05215.
  438. Struble, C., Bascaran, E. Bannerot, R., Mistree, F. (1989) "Computer-Based Multiobjective Hierarchical Design of Spacecraft Thermal Control Systems." in Proceedings of the 19th Intersociety Conference on Environmental Systems, San Diego, CA, July 24-27, 1989.
  439. Struble, C. L., Bascaran, E., Bannerot, R. B. and Mistree, F. (1989) "Compromise: A Multiobjective Hierarchical Approach to the Design of Spacecraft Thermal Control Systems." in Proceedings of the ASME Computers in Engineering Conference, Anaheim, CA. 423-428.
  440. Koops, A., Oomen, A. C. W. J. and Bras, B. A. (1988) "Computer Aided Design Assistance and Decision Support." Computer Applications in the Automation of Shipyard Operation and Ship Design VI. North-Holland:Amsterdam.
  441. Mistree, F., Marinopoulos, S., Jackson, D. and Shupe, J. (1988) "The Design of Aircraft using the Decision Support Problem Technique." Contractor Report, 4134.
  442. Mistree, F., Kamal, S. Z. and Allen, R. H. (1988) A Discussion of DOMINIC: A Domain-Independent Program for Mechanical Engineering Design. 3(11), 44-45
  443. Mistree, F., Karandikar, H. M., Shupe, J. A. and Bascaran, E. (1988) "Computer Based Design Synthesis: An Approach to Problem Solving."
  444. Mistree, F., Marinopoulos, S., Jackson, D. and Shupe, J. A. (1988) "The Design of Aircraft using the Decision Support Problem Technique." NASA Contractor Report 4134.
  445. Muster, D. and Mistree, F. (1988) The Decision Support Problem Technique in Engineering Design. International Journal of Applied Engineering Education, 4(1), 23-33
  446. Shupe, J. A., Muster, D., Allen, J. K. and Mistree, F. (1988) "Decision-Based Design: Some Concepts and Research Issues." In A. Kusiak (Ed. Expert Systems, Strategies and Solutions in Manufacturing Design and Planning. Society of Manufacturing Engineers:Dearborn, Michigan.
  447. Bascaran, E., Bannerot, R., Mistree, F. (1987) "The Conceptual Development of a Methodology for Solving Multi-Objectiove Hierarchical Thermal Design Problems." in Proceedings of the National Heat Transfer Conference, Pittsburgh, PA, August, 1987.
  448. Bascaran, E., Bannerot, R. B. and Mistree, F. (1987) "The Conceptual Development of a Methodology for Solving Multi-Objective Hierarchical Thermal Design Problems." in Proceedings of the ASME National Heat Transfer Conference, Pittsburgh, PA.
  449. Bascaran, E., Mistree, F. and Bannerot, R. B. (1987) "The Conceptual Development of a Method for Solving Multi-objective Hierarchical Thermal Design Problems." in Proceedings of the ASME 1987 National Heat Transfer Conference, Pittsburgh, Pennsylvania. •••.
  450. Bascaran, E., Mistree, F. and Bannerot, R. B. (1987) Compromise: An Effective Approach for Solving Multi-objective Thermal Design Problems. Engineering Optimization, 12(3), 175-189
  451. Bras, B. A. (1987) "Computer-Based Decision Support in the Design Process." M.S. Thesis, OC-D-135.
  452. Kamal, S. Z., Karandikar, H. M., Mistree, F. and Muster, D. (1987) "Knowledge Representation for Dscipline-Independent Decision Making." In J. Gero (Ed. Expert Systems in Computer-Aided Design. Elsevier Science Publishers B.V.:Amserdam.
  453. Kamal, S. Z., Karandikar, H. M., Mistree, F. and Muster, D. (1987) "Knowledge Representation for Discipline-Independent Decision Making." In J. Gero (Ed. Expert Systems in Computer-Aided Design. Elsevier Science Publishers B.V.:Amsterdam.
  454. Karandikar, H. M. and Mistree, F. (1987) Conditional Post-Solution Analysis of Multiobjective Compromise Decision Support Problems. 12(43-61
  455. Marinopoulos, S., Jackson, D., Shupe, J. A. and Mistree, F. (1987) "Compromise: An Effective Approach for Conceptual Aircraft Design." in Proceedings of the AIAA/AHS/ASEE Aircraft Design, Systems and Operations Meeting, St. Louis, Missouri. •••.
  456. Shupe, J., Mistree, F., Sobieski, J. (1987) Compromise: An Effective Approach for the Hierarchical Design of Structural Systems. Computers and Structures, 26(6), 1027-1037
  457. Shupe, J. A. and Mistree, F. (1987) Compromise: An Effective Approach for the Design of Damage Tolerant Structural Systems. Computers and Structures, 27(3), 407-415
  458. Smith, W. F., Kamal, S. Z. and Mistree, F. (1987) The Influence of Hierarchical Decisions on Ship Design. Marine Technology, 24(2), 131-142
  459. Nguyen, N. and Mistree, F. (1986) A Computer-based Method for the Rational Design of Horizontal Pressure Vessels. ASME Journal of Mechanism, Transmissions and Automation in Design, 108(203-210
  460. Jivan, A. and Mistree, F. (1985) "A Computer-based Method for Designing Statically Loaded Helical Compression Springs." in Proceedings of the ASME 11th Design Automation Conference, Cincinnati, Ohio.
  461. Kuppuraju, N., Ittimakin, P., Mistree, F. (1985) Design Through Selection ... A Method that Works. Design Studies, 6(2), 91-106
  462. Kuppuraju, N., Ganesan, S., Mistree, F. and Sobieski, J. S. (1985) Hierarchical Decision Making in System Design. Engineering Optimization, 8(223-252
  463. Kuppuraju, N., Ittimakin, P. and Mistree, F. (1985) Design through Selection ... A Method that Works. Design Studies, 6(2), 91-106
  464. Lyon, T. D. and Mistree, F. (1985) A Computer-based Method for the Preliminary Design of Ships. JSR, 29(4), 251-269
  465. Mistree, F. and Muster, D. (1984) Mechanical Design: An Undergraduate Curriculum for Design in the Systems Age. 818-826
  466. Mistree, F., Hughes, O. F. and Phuoc, H. B. (1981) An Optimization Method for the Design of Large, Highly Constrained, Complex Systems. Engineering Optimization, 5(3), 141-144
  467. Hughes, O. F., Mistree, F. and Zanic, V. (1980) A Practical Method for the Rational Design of Ship Structures. JSR, 24(2), 101-113
  468. Hughes, O. F., Mistree, F. and Davies, J. (1977) "Automated Limit State Design of Steel Structures." in Proceedings of the Sixth Australian Conference on the Mechanics of Structures and Materials, Christchurch, New Zealand. 98-106.

Created by rmalak
Last modified 08/20/2007 12:08 PM
« November 2009 »
Su Mo Tu We Th Fr Sa
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30          
Log in


Forgot your password?
 
 
Powered by Plone